Document
www.DataSheet4U.com
PD-95831 RevB
IRAMS06UP60A Series
Plug N DriveTM Integrated Power Module for Appliance Motor Drive
Description
International Rectifier’s IRAMS06UP60A is an Integrated Power Module developed and optimized for electronic motor control in appliance applications specifically for VF compressor drives for refrigerators and freezer or in heating and ventilation as electronic fan controls. The IRAMS06UP60A offers an extremely compact, high performance AC motor-driver in a single isolated package for a very simple design. A built-in temperature monitor and over-current protection, along with the short-circuit rated IGBTs and integrated under-voltage lockout function, deliver high level of protection and fail-safe operation. The integration of the bootstrap diodes for the high-side driver section, and the single polarity power supply required to drive the internal circuitry, simplify the utilization of the module and deliver further cost reduction advantages.
6A, 600V
Features
• • • • • • • • • • • • Integrated Gate Drivers and Bootstrap Diodes Temperature Monitor Overcurrent shutdown Fully Isolated Package. Low V CE(on) Non Punch Through IGBT Technology Undervoltage lockout for all channels Matched propagation delay for all channels Schmitt-triggered input logic Cross-conduction prevention logic Lower di/dt gate driver for better noise immunity Motor Power range 0.1~0.5kW / 85~253 Vac Isolation 2000VRMS /1min
Absolute Maximum Ratings
Parameter VCES V+ Io @ TC=25°C Io @ TC=100°C Ipk Fp Pd Viso TJ (IGBT & Diodes) TJ (Driver IC) T Description Maximum IGBT Blocking Voltage Positive Bus Input Voltage RMS Phase Current RMS Phase Current Maximum Peak Phase Current (tp<100ms) Maximum PWM Carrier Frequency Maximum Power dissipation per Phase Isolation Voltage (1min) Operating Junction temperature Range Operating Junction temperature Range Mounting torque Range (M3 screw) Max. Value 600 450 6 3 10 20 7.5 2000 -40 to +150 -40 to +150 0.8 to 1.0 kHz W VRMS °C Nm A Units V
www.irf.com
1
IRAMS06UP60A
Internal Electrical Schematic - IRAMS06UP60A
V+ (10)
VRU (12) VRV (13) VRW (14)
Rg1
Rg3
Rg5
VB1 (7) U, VS1 (8) VB2 (4) V, VS2 (5) VB3 (1) W, VS3 (2)
23 VS1
22 21 20 19 18 17 VB2 HO2 VS2 VB3 HO3 VS3
Rg2
LO1 16
R3 HIN1 (15) HIN2 (16) HIN3 (17) LIN1 (18) LIN2 (19) LIN3 (20) T/ITRIP (21) RT VDD (22) VSS (23) THERMISTOR
24 HO1 25 VB1 1 VCC 2 HIN1 3 HIN2 4 HIN3 5 LIN1 LIN2 LIN3 F ITRIP EN RCIN VSS COM 6 7 8 9 10 11 12 13 LO2 15
Rg4 Rg6
LO3 14
Driver IC
R1 R2 C
2
www.irf.com
IRAMS06UP60A
Inverter Section Electrical Characteristics @ TJ = 25°C
Symbol V(BR)CES ∆V(BR)CES / ∆T VCE(ON) ICES Ilk_module VFM Parameter Collector-to-Emitter Breakdown Voltage Temperature Coeff. Of Breakdown Voltage Collector-to-Emitter Saturation Voltage Zero Gate Voltage Collector-toEmitter Current Zero Gate Voltage Phase-tophase Current Diode Forward Voltage Drop Min 600 ---------------Typ --0.3 1.9 2.2 15 60 -1.45 1.25 Max ----2.4 2.6 45 170 50 1.85 1.65 Units Conditions V V/°C V VIN =5V, IC=250µA VIN =5V, IC=1.0mA (25°C - 150°C) IC=3A, VDD=15V IC=3A, VDD=15V, TJ=150°C VIN =5V, V+=600V VIN =5V, V+=600V, TJ=150°C VIN =5V, V+=600V IC=3A IC=3A, TJ=150°C
µA µA
V
Inverter Section Switching Characteristics @ TJ = 25°C
Symbol Eon Eoff Etot Eon Eoff Etot Erec trr RBSOA Parameter Turn-On Switching Loss Turn-Off Switching Loss Total Switching Loss Turn-on Swtiching Loss Turn-off Switching Loss Total Switching Loss Diode Reverse Recovery energy Diode Reverse Recovery time Reverse Bias Safe Operating Area Short Circuit Safe Operating Area Min ----------------Typ 130 65 195 200 90 290 50 150 FULL SQUARE Max 235 120 355 345 150 495 110 200 Units Conditions IC=3A, V+=400V VDD=15V, L=1mH See CT1 TJ=25°C TJ=150°C
µJ
µJ µJ
ns
Energy losses include "tail" and diode reverse recovery TJ=150°C, V+ =400V VDD =15V, IF =3A, L=1mH TJ=150°C, I C=3A, VP=600V V+=480V, VDD=+15V to 0V See CT3
SCSOA
10
---
---
µs
TJ=150°C, VP=600V, V+=360V, VDD=+15V to 0V
See CT2
Thermal Resistance
Symbol Rth(J-C) Parameter Junction to case thermal resistance, each IGBT under inverter operation. Junction to case thermal resistance, each Diode under inverter operation. Thermal Resistance case to sink Min --Typ --Max 6.5 Units Conditions °C/W Flat, greased surface. Heatsink compound thermal conductivity - 1W/mK
Rth(J-C) Rth(C-S)
-----
--0.1
9 ---
°C/W °C/W
www.irf.com
3
IRAMS06UP60A
Absolute Maximum Ratings Driver Function
Absolute Maximum Ratings indicate substaines limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to VSS . (Note 1) 14
Symbol VS1,2,3 VB1,2,3 VDD VIN TJ
Definition High Side offset voltage High Side floating supply voltage Low Side and logic fixed supply voltage Input voltage LIN, HIN, T/ITRIP Juction Temperature
Min -0.3 -0.3 -0.3 -0.3 -40
Max 600 20 20 7 150
Units V V V V °C
Recommended Operating Conditions Driver Function
The Input/Output logic timing diagram is shown i.