www.DataSheet4U.com
China Electronics Technology Group Corporation No.26 Research Institute
140MHz High-Loss SAW Filte...
www.DataSheet4U.com
China Electronics Technology Group Corporation No.26 Research Institute
140MHz High-Loss SAW Filter 3.5MHz Bandwidth
Part Number: LB140DS04
www.sipatsaw.com
SIPAT Co., Ltd.
Specifications
Parameter Center Frequency
Insertion Loss 1 dB Bandwidth 3 dB Bandwidth 35 dB Bandwidth Passband Variation Group delay Variation(80% of 3dB) Ultimate Rejection Absolute Delay Subatrate Material Ambient Temperature Package Size °C
Unit
MHz dB MHz MHz MHz dB nsec dB
Minimum
139.8 3.5 4 35 -
Typical
140 12 4 4.92 7.9 0.4 60 39 0.86
Maximum
140.2 13.5 8.2 1 100 -
usec
112LT
25
SMP-53 (13.3 x 6.5 mm Nominal Footprint)
Notes:
1. All specifications are based on the test circuit shown 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. This is the optimum impedance in order to achieve the performance show
Matching Configuration
L1=120nH L3=220nH
L2=18nH L4=120nH
Source/Load Impedance=50 ohm
Notes - Component values may change depending on board layout.
SIPAT Co., Ltd.
( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060
Part Number Rev. Date Rev.
LB140DS04 2005-1-10 1.0 Page 1/3
Phone: +86-23-62920684
Fax: +86-23-62805284
www.sipatsaw.com /
[email protected]
China Electronics Technology Group Corpor...