Document
www.DataSheet4U.com
FUJITSU SEMICONDUCTOR DATA SHEET
DS07-12546-1E
8-bit Original Microcontroller
CMOS
F2MC-8L MB89530H Series
MB89537H/537HC/538H/538HC/ MB89P538/PV530
s DESCRIPTION
The MB89530H series is a one-chip microcontroller featuring the F2MC-8L core supporting low-voltage and highspeed operation. Built-in peripheral functions include timers, serial interface, A/D converter, and external interrupt. This product is an ideal general-purpose one-chip microcontroller for a wide variety of applications from household to industrial equipment, as well as use in portable devices.
s FEATURES
• Wide range of package options • Two types of QFP packages (1 mm pitch, 0.65 mm pitch) • LQFP package (0.5 mm pitch) • SH-DIP package • Low voltage, high-speed operating capability • Minimum instruction execution time 0.32 µs (at base oscillator 12.5 MHz) • F2MC-8L CPU Core • Instruction set optimized for controller operation • Multiplication/division instructions • 16-bit calculation • Branching instructions with bit testing • Bit operation instructions, etc. • Five timer systems • 8-bit PWM timer with 2 channels (usable as either interval timer of PWM timer) • Pulse width count timer (supports continuous measurement or remote control receiving applications) • 16-bit timer counter • 21-bit time base timer • Clock prescaler (17-bit) • UART • Synchronous or asynchronous operation, switchable • 2 serial interfaces (Serial I/O) • Selection of transfer direction (specify MSB first or LSB first) for communication with a variety of devices
(Continued)
MB89530H Series
(Continued) • 10-bit A/D converter (8 channels) • External clock input and time base timer output for startup support • Pulse generators (PPG) with 2-program capability • 6-bit PPG with selection of pulse width and pulse period • 12-bit PPG (2 channels) with selection of pulse width and pulse period • I2C interface circuits • External interrupt 1 (4 channels) • 4 independent inputs, release enabled from standby mode (includes edge detection function) • External interrupt 2 (8 channels) • 8 independent inputs, release enabled form standby mode (includes level edge detection function) • Standby modes (low power consumption modes) • Stop mode (oscillator stops, virtually no power consumed) • Sleep mode (CPU stops, power consumption reduced to one-third) • Sub clock mode • Clock mode • Watchdog timer reset • I/O ports • Maximum 53 ports • 38 general-purpose I/O ports (CMOS) • 2 general-purpose I/O ports (N-ch open drain) • 8 general-purpose output ports (N-ch open drain) • 5 general-purpose input ports (CMOS)
s PACKAGES
64-pin, Plastic SH-DIP 64-pin, Plastic LQFP 64-pin, Plastic QFP
(DIP-64P-M01) 64-pin, Plastic QFP
(FPT-64P-M03) 64-pin, Ceramic MDIP
(FPT-64P-M06) 64-pin, Ceramic MQFP
(FPT-64P-M09)
(MDP-64C-P02)
(MQP-64C-P01)
2
MB89530H Series
s PRODUCT LINEUP
Part number MB89537H/537HC Parameter Type MB89538H/538HC MB89P538 One-time programmable 48 K × 8-bit (built-in ROM) (write from gen.
Similar Datasheet