DatasheetsPDF.com

S71PL129N Dataheets PDF



Part Number S71PL129N
Manufacturers SPANSION
Logo SPANSION
Description MirrorBit MCPs
Datasheet S71PL129N DatasheetS71PL129N Datasheet (PDF)

www.DataSheet4U.com S71PL-N MirrorBitTM MCPs S71PL256N, S71PL127N, S71PL129N 256/128/128 Megabit (16/8/8 M x 16-Bit) CMOS 3.0 Volt-only Simultaneous Read/Write, Page Mode Flash Memory S71PL-N MirrorBitTM MCPs Cover Sheet Data Sheet Notice to Readers: This document states the current technical specifications regarding the Spansion product(s) described herein. Each product described herein may be designated as Advance Information, Preliminary, or Full Production. See Notice On Data Sheet Design.

  S71PL129N   S71PL129N



Document
www.DataSheet4U.com S71PL-N MirrorBitTM MCPs S71PL256N, S71PL127N, S71PL129N 256/128/128 Megabit (16/8/8 M x 16-Bit) CMOS 3.0 Volt-only Simultaneous Read/Write, Page Mode Flash Memory S71PL-N MirrorBitTM MCPs Cover Sheet Data Sheet Notice to Readers: This document states the current technical specifications regarding the Spansion product(s) described herein. Each product described herein may be designated as Advance Information, Preliminary, or Full Production. See Notice On Data Sheet Designations for definitions. Publication Number S71PL-N_00 Revision A Amendment 9 Issue Date December 8, 2006 Data Sheet Notice On Data Sheet Designations Spansion Inc. issues data sheets with Advance Information or Preliminary designations to advise readers of product information or intended specifications throughout the product life cycle, including development, qualification, initial production, and full production. In all cases, however, readers are encouraged to verify that they have the latest information before finalizing their design. The following descriptions of Spansion data sheet designations are presented here to highlight their presence and definitions. Advance Information The Advance Information designation indicates that Spansion Inc. is developing one or more specific products, but has not committed any design to production. Information presented in a document with this designation is likely to change, and in some cases, development on the product may discontinue. Spansion Inc. therefore places the following conditions upon Advance Information content: “This document contains information on one or more products under development at Spansion Inc. The information is intended to help you evaluate this product. Do not design in this product without contacting the factory. Spansion Inc. reserves the right to change or discontinue work on this proposed product without notice.” Preliminary The Preliminary designation indicates that the product development has progressed such that a commitment to production has taken place. This designation covers several aspects of the product life cycle, including product qualification, initial production, and the subsequent phases in the manufacturing process that occur before full production is achieved. Changes to the technical specifications presented in a Preliminary document should be expected while keeping these aspects of production under consideration. Spansion places the following conditions upon Preliminary content: “This document states the current technical specifications regarding the Spansion product(s) described herein. The Preliminary status of this document indicates that product qualification has been completed, and that initial production has begun. Due to the phases of the manufacturing process that require maintaining efficiency and quality, this document may be revised by subsequent versions or modifications due to changes in technical specifications.” Combination Some data sheets con.



Similar Datasheet



S71PL127N << | S71PL129N | >> S71PL512ND0


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)