www.DataSheet4U.com
T6K41
Preliminary
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
T6K41
Column and Ro...
www.DataSheet4U.com
T6K41
Preliminary
TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic
T6K41
Column and Row Driver LSI for a Dot Matrix Graphic LCD
The T6K41 is a driver for a small-to-medium-sized dot matrix graphic LCD, especially for four-gray-scale monochromatic STN Unit: mm LCDs. This driver can be interfaced to the MPU via an 8-bit Lead Pitch (80/68-series) or a serial interface, and is operated T6K41 asynchronously with the MPU. IN OUT Since the T6K41 contains a CR oscillator, it can generate the timing signals required for the LCD. The T6K41 has 128 outputs for the LCD drive (segment) Please contact your nearest TOSHIBA dealer for individual package dimensions. signals that constitute the display data, 128 outputs for the LCD drive (common) signals that constitute the scanning signals and No idea 16 bits of static-LCD drive (icon) signals. Furthermore, the T6K41 has 128 × 128 × 2 bits display RAM and 16-bit register. TCP (Tape Carrier Package) Thus, this single device allows you to drive an LCD panel comprised of up to 128 × 128 + 16 dots with a minimize of power requirement. It also incorporates a gray-scale function. The display RAM of the T6K41 is a two-port RAM so that the MPU access it without any wait time. To minimize power consumption, the T6K41 has a display change mode (power save mode) in which only a 16-dot icon can be displayed. Furthermore, it has various built-in analog circuits such as a voltage
regulator, voltage divider resistors, power...