DMX710

www.DataSheet4U.com DMX710 DMX512 Transmitter with 6/8/12 digital or analoge inputs FEATURES 5V SUPPLY VOLTAGE TRANSMIT DMX512 SIGNAL CASCADEABLE FOR MORE INPUTS UP TO 12 DIGITAL INPUTS UP TO 6 ANALOGE INPUTS PACKAGE: DIL28S DESCRIPTION The DMX710 is an DMX512 transmitter with digital inputs. The values of the output signal are 0 or 255 in digital mode and 0 – 255 in analoge mode, dependent on the input signal. With the BLACKOUT input it is possible to set all DMX output channels to 0. To combine some DMX710 chips, connect the DMX output with the DTC input (DMX transmitter chain) from the next chip. More informations about the DTC you can find in the separate document. PIN CONFIGURATION RST DTC IN DMX OUT LED BLACKOUT FCAI VCC IN 6 IN 5 IN 4 IN 3 IN 2 IN 1 GND VCC analoge and/or digital inputs DTC in DMX710 DMX out DMX710 GND X0 X1 MODE 0 MODE 1 INV INPUT IN 7 VCC VCC MODE IN 12 IN 11 IN 10 IN 9 IN 8 RST GND © 2005 Markus Siwek WWW.DMX4ALL.DE 1 DMX710 PIN DESCRIPTION MNEMONIC RST PIN 1 TYPE NAME AND FUNCTION I RESET Reset input. A low level on this pin for more then 50ns will generate a reset, even if the clock is not running. Shorter pulses are not guaranteed to generate a reset DTC-SIGNAL Input for the DMX Transmitter Chain (DTC). If not used, this pin must connect to GND. DMX-SIGNAL Output for the DMX512 signal POWER This is the power supply GROUND 0V reference XTAL0 Input from the inverting oscillator amplifier XTAL1 Output from the inverting o...