DatasheetsPDF.com

IRK91 Dataheets PDF



Part Number IRK91
Manufacturers International Rectifier
Logo International Rectifier
Description (IRK71 / IRK91) ADD-A-pak GEN V Power Modules
Datasheet IRK91 DatasheetIRK91 Datasheet (PDF)

www.DataSheet4U.com Bulletin I27132 rev. H 10/02 IRK.71, .91 SERIES THYRISTOR/ DIODE and THYRISTOR/ THYRISTOR Features High Voltage Industrial Standard Package Thick Al metal die and double stick bonding Thick copper baseplate UL E78996 approved 3500VRMS isolating voltage ADD-A-pakTM GEN V Power Modules Benefits Up to 1600V Full compatible TO-240AA High Surge capability Easy Mounting on heatsink Al203 DBC insulator Heatsink grounded 75 A 95 A Mechanical Description The Generation V of Add-.

  IRK91   IRK91



Document
www.DataSheet4U.com Bulletin I27132 rev. H 10/02 IRK.71, .91 SERIES THYRISTOR/ DIODE and THYRISTOR/ THYRISTOR Features High Voltage Industrial Standard Package Thick Al metal die and double stick bonding Thick copper baseplate UL E78996 approved 3500VRMS isolating voltage ADD-A-pakTM GEN V Power Modules Benefits Up to 1600V Full compatible TO-240AA High Surge capability Easy Mounting on heatsink Al203 DBC insulator Heatsink grounded 75 A 95 A Mechanical Description The Generation V of Add-A-pak module combine the excellent thermal performance obtained by the usage of Direct Bonded Copper substrate with superior mechanical ruggedness, thanks to the insertion of a solid Copper baseplate at the bottom side of the device. The Cu baseplate allow an easier mounting on the majority of heatsink with increased tolerance of surface roughness and improve thermal spread. The Generation V of AAP module is manufactured without hard mold, eliminating in this way any possible direct stress on the leads. The electrical terminals are secured against axial pull-out: they are fixed to the module housing via a click-stop feature already tested and proved as reliable on other IR modules. Electrical Description These modules are intended for general purpose high voltage applications such as high voltage regulated power supplies, lighting circuits, temperature and motor speed control circuits, UPS and battery charger. Major Ratings and Characteristics Parameters IT(AV) or IF(AV) @ 85°C IO(RMS) (*) ITSM @ 50Hz IFSM @ 60Hz I t 2 IRK.71 75 165 1665 1740 13.86 12.56 138.6 IRK.91 95 210 1785 1870 15.91 14.52 159.1 Units A A A A KA 2s KA2s KA 2√s V o @ 50Hz @ 60Hz I √t V RRM range TSTG TJ (*) As AC switch. 2 400 to 1600 - 40 to 125 - 40 to125 C C o www.irf.com 1 IRK.71, .91 Series Bulletin I27132 rev. H 10/02 ELECTRICAL SPECIFICATIONS Voltage Ratings Type number Voltage Code 04 06 08 IRK.71/ .91 10 12 14 16 VRRM , maximum VRSM , maximum VDRM , max. repetitive repetitive non-repetitive peak off-state voltage, peak reverse voltage peak reverse voltage gate open circuit V 400 600 800 1000 1200 1400 1600 IRRM IDRM 125°C mA V 500 700 900 1100 1300 1500 1700 V 400 600 800 1000 1200 1400 1600 15 On-state Conduction Parameters IT(AV) IF(AV) Max. average on-state current (Thyristors) Max. average forward current (Diodes) IO(RMS) Max. continuous RMS on-state current. As AC switch ITSM or IFSM Max. peak, one cycle non-repetitive on-state or forward current 165 1665 1740 1400 1470 1850 1940 I2 t Max. I2t for fusing 13.86 12.56 9.80 8.96 17.11 15.60 I2√t Max. I2√t for fusing (1) voltage (2) rt VTM VFM di/dt Max. value of on-state slope resistance (2) Max. peak on-state or forward voltage Max. non-repetitive rate of rise of turned on current IH IL Max. holding current Max. latching current 200 mA 400 150 A/µs 1.59 1.58 V 138.6 0.82 0.85 3.00 2.90 210 A 1785 1870 1500 1570 2000 2100 15.91 14.52 11.25 10.27 20.00 18.30 159.1 0.80 0.85 2.40 2.25 KA2√s V mΩ KA2s or 75 95 180o conduction, half sine wave, TC = 85oC IRK.71 IRK.91 Units Conditions I(RMS) t=8.3ms reapplied I(RMS) Sinusoidal half wave, Initial TJ = TJ max. t=10ms No voltage t=10ms 100% VRRM t=8.3ms reapplied t=10ms TJ = 25oC, t=8.3ms no voltage reapplied t=10ms No voltage t=8.3ms reapplied t=10ms 100% VRRM t=8.3ms reapplied t=10ms TJ = 25oC, t= 8.3ms no voltage reapplied t=0.1 to 10ms, no voltage reapplied Low level (3) High level (4) Low level High level (4) ITM = π x IT(AV) IFM = π x IF(AV) TJ = TJ max (3) TJ = TJ max TJ = 25°C Initial TJ = TJ max. VT(TO) Max. value of threshold TJ = 25oC, from 0.67 VDRM, ITM =π x IT(AV), I = 500mA, g tr < 0.5 µs, tp > 6 µs TJ = 25oC, anode supply = 6V, resistive load, gate open circuit TJ = 25oC, anode supply = 6V, resistive load (3) 16.7% x π x IAV < I < π x IAV (1) I2t for time tx = I2√t x √tx (4) I > π x IAV (2) Average power = VT(TO) x IT(AV) + rt x (IT(RMS))2 2 www.irf.com IRK.71, .91 Series Bulletin I27132 rev. H 10/02 Triggering Parameters PGM IGM Max. peak gate power IRK.71 12 3.0 3.0 10 4.0 2.5 1.7 270 150 80 IRK.91 12 3.0 3.0 Units W A Conditions PG(AV) Max. average gate power Max. peak gate current gate voltage VGT Max. gate voltage required to trigger IGT Max. gate current required to trigger Max. gate voltage that will not trigger Max. gate current that will not trigger -VGM Max. peak negative V TJ = - 40°C TJ = 25°C TJ = 125°C TJ = - 40°C TJ = 25°C TJ = 125°C Anode supply = 6V resistive load Anode supply = 6V resistive load mA VGD IGD 0.25 6 V mA TJ = 125oC, rated VDRM applied TJ = 125oC, rated VDRM applied Blocking Parameters IRRM IDRM Max. peak reverse and off-state leakage current at VRRM, VDRM 2500 (1 min) VINS RMS isolation voltage 3500 (1 sec) 500 V/µs V shorted TJ = 125oC, linear to 0.67 VDRM, gate open circuit 50 Hz, circuit to base, all terminals 15 mA TJ = 125 oC, gate open circuit IRK.71 IRK.91 Units Conditions dv/dt Max. critical rate of rise of off-state voltage (5) (5.


IRK71 IRK91 IRL3202S


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)