SGA

www.DataSheet4U.com ARINC 600 Rack and Panel Connectors Available Rear Release/Rear Removable Front Release/Front Removable Low Insertion force contacts. Both environmental and non-environmentl versions. Polarizing post that are removable from the mating face. Field replaceble inserts. Up to 150 Size #22 contacts per connector. Crimp, coax, twinax, printed circuit and wire wrappable post style contacts. Uses standard ARINC 600, crimp, insertion/ extraction tooling. SGA SGA connectors utilize all the Signal cavity inserts and contacts from the ARINC 600 connector series. It was designed to be used where there are space constraints in which a standard ARINC 600 connector can not be used. ITT Cannon's SGA connector fills the need for a 150 maximum contact connector with a smaller shell design than Shell Size 2 of ARINC 600, and has more contacts available than single gang DPX with 106 Size 22 contacts. Materials and Finishes SGA*D Material Shell Insulator Finish Material Material Contacts Finish Termination Grommets/Seals O-Ring Material Material Aluminum alloy Clear chromate over cadmium Thermoplastic Copper alloy Gold Crimp N/A N/A SGA*E Aluminum alloy Clear chromate over cadmium Thermoplastic Copper alloy Gold Crimp Silicone-based Elastomer Silicone-based Elastomer SGA*F Aluminum alloy Clear chromate over cadmium Thermoset Copper alloy Gold P.C/Wrap Post N/A N/A Specifications QQ-A-591/A380 QQ-P-416 N/A QQ-C-533 MIL-G-45204 N/A N/A N/A How to Order (Refer to ARINC 600 [B...