DatasheetsPDF.com

VL-FS-MDLS16119D-01 Dataheets PDF



Part Number VL-FS-MDLS16119D-01
Manufacturers VARITRONIX
Logo VARITRONIX
Description SPECIFICATION OF LCD MODULE TYPE
Datasheet VL-FS-MDLS16119D-01 DatasheetVL-FS-MDLS16119D-01 Datasheet (PDF)

www.DataSheet4U.com VL-FS- MDLS16119D-01 REV. A (MDLS16119D-LV-DIE IC) OCT/2001 PAGE 2 OF 12 DOCUMENT REVISION HISTORY 1: DOCUMENT DATE DESCRIPTION REVISION FROM TO A 2002.10.11 Based on the Test Specification: VL-TS-MDLS16119D-XX REV. B, 2002.02.01) CHANGED BY PHILIP CHENG CHECKED BY TOM LEE VL-FS- MDLS16119D-01 REV. A (MDLS16119D-LV-DIE IC) OCT/2001 PAGE 3 OF 12 CONTENTS Page No. 1. 2. 3. 3.1 3.2 4. 4.1 4.2 4.3 4.4 4.5 GENERAL DESCRIPTION MECHANICAL SPECIFICATIONS ABSOLUTE MAXIMUM RATING.

  VL-FS-MDLS16119D-01   VL-FS-MDLS16119D-01


Document
www.DataSheet4U.com VL-FS- MDLS16119D-01 REV. A (MDLS16119D-LV-DIE IC) OCT/2001 PAGE 2 OF 12 DOCUMENT REVISION HISTORY 1: DOCUMENT DATE DESCRIPTION REVISION FROM TO A 2002.10.11 Based on the Test Specification: VL-TS-MDLS16119D-XX REV. B, 2002.02.01) CHANGED BY PHILIP CHENG CHECKED BY TOM LEE VL-FS- MDLS16119D-01 REV. A (MDLS16119D-LV-DIE IC) OCT/2001 PAGE 3 OF 12 CONTENTS Page No. 1. 2. 3. 3.1 3.2 4. 4.1 4.2 4.3 4.4 4.5 GENERAL DESCRIPTION MECHANICAL SPECIFICATIONS ABSOLUTE MAXIMUM RATINGS ELECTRICAL MAXIMUM RATINGS (Ta=25°C) ENVIRONMENTAL CONDITION ELECTRICAL SPECIFICATIONS INTERFACE SIGNALS TYPICAL ELECTRICAL CHARACTERISTICS TIMING SPECIFICATIONS TIMING DIAGRAM OF VDD AGAINST V0 CORRESPONDENCE BETWEEN CHARACTER CODES AND CHARACTER PATTERNS(NOVATEK STANDARD NT3881D-01) 4 4 6 6 6 7 7 8 9 11 12 VL-FS- MDLS16119D-01 REV. A (MDLS16119D-LV-DIE IC) OCT/2001 PAGE 4 OF 12 VARITRONIX LIMITED Specification of LCD Module Type Item No.: MDLS16119D-01 1. General Description • • • • • 16 characters (5 x 11 dots) x 1 line STN Positive Yellow Reflective LCD Character Module. Viewing Angle: 6 o’clock direction. Driving duty: 1/16 duty, 1/4 bias. ‘NOVATEK’ NT3881DH-01/AI (die form) LCD Controller and Driver or equivalent. ‘SAMSUNG’ KS0065B-PCC (die form) LCD Segment Driver or equivalent. 2. Mechanical Specifications The mechanical detail is shown in Fig. 1 and summarized in Table 1 below. Table 1 Parameter Outline dimensions Effective viewing area Display format Character size Character spacing Character pitch Dot size Dot spacing Dot pitch Weight Specifications 80.0(W) x 36.0(H) x 11.0 MAX.(D) 64.5(W) x 13.8(H) 16 characters x 1 line 3.15(W) x 8.70(H) (5 x 11 dots) 0.60(W) 3.75(W) 0.55(W) x 0.70(H) 0.10(W) x 0.10(H) 0.65(W) x 0.80(H) TBD Unit mm mm mm mm mm mm mm mm grams VL-FS- MDLS16119D-01 REV. A (MDLS16119D-LV-DIE IC) OCT/2001 PAGE 5 OF 12 Figure 1: Outline Drawing VL-FS- MDLS16119D-01 REV. A (MDLS16119D-LV-DIE IC) OCT/2001 PAGE 6 OF 12 3. 3.1 Absolute Maximum Ratings Electrical Maximum Ratings(Ta = 25 ºC) Table 2 Parameter Power Supply voltage (Logic) Power Supply voltage (LCD drive) Input voltage -0.3 VDD+0.3 V Note: The modules may be destroyed if they are used beyond the absolute maximum ratings. All voltage values are referenced to VSS = 0V. Symbol VDD - VSS VLCD =VDD – V0 Vin Min. -0.3 -0.3 Max. +7.0 +13.5 Unit V V 3.2 Environmental Condition Table 3 Operating Storage Temperature Temperature (Topr) (Tstg) Min. Max. Min. Max. 0°C +50°C -10°C +60°C 95% max. RH for Ta ≤ 40°C < 95% RH for Ta > 40°C Frequency: 10 ∼ 55 Hz Amplitude: 0.75 mm Duration: 20 cycles in each direction. Pulse duration : 11 ms Peak acceleration: 981 m/s2 = 100g Number of shocks : 3 shocks in 3 mutually perpendicular axes. Item Remark Ambient Temperature Humidity Vibration (IEC 68-2-6) cells must be mounted on a suitable connector Shock (IEC 68-2-27) Half-sine pulse shape Dry no condensation 3 directions 3 directions VL-FS- MDLS16119D-01 REV. A (MDLS16119D-LV-DIE IC) OCT/2001 PAGE 7 OF 12 4. Electrical Specifications 4.1 Interface signals Table 4 Pin No. 1 2 3 4 Symbol VSS VDD V0 RS Description Ground Power supply for logic. Power supply for LCD driver. Register Select Input : ”High” for Data register (for read and write). ”Low” for Instruction register (for write), Busy flag, address counter (for read). Read/Write signal: ’High’ for Read mode. ’Low’ for Write mode. Enable. Start signal for data read /write. Data input/output (LSB) Data input/output Data input/output Data input/output Data input/output Data input/output Data input/output Data input/output (MSB) Anode of backlight (OPTIONAL). Cathode of backlight (OPTIONAL). 5 R/W 6 7 8 9 10 11 12 13 14 A K E DB0 DB1 DB2 DB3 DB4 DB5 DB6 DB7 LED(+) LED(-) VL-FS- MDLS16119D-01 REV. A (MDLS16119D-LV-DIE IC) OCT/2001 PAGE 8 OF 12 4.2 Typical Electrical Characteristics At Ta = 25 °C, VDD = 5V±5%, VSS=0V. Table 5 Parameter Supply voltage (Logic) Supply voltage (LCD) Input signal voltage 1 for E,DB0-DB7,R/W,RS. Input signal voltage 2 for OSC1. Supply Current (Logic & LCD) Symbol VDD- VSS VDD-V0 VIH1 VIL1 VIH2 VIL2 IDD Conditions VDD = 5V, Note 1. ” H” level ” L” level ” H” level ” L” level Character mode, Note 1 Checker board mode, Note 1 Character mode, Note 1 Checker board mode, Note 1 Min. 4.75 4.2 2.2 -0.3 VDD -1.0 VSS Typ. 5.0 4.4 0.8 1.4 0.5 0.5 Max. 5.25 4.6 VDD 0.8 VDD 1.0 1.2 2.1 0.7 0.7 Unit V V V V V V mA mA mA mA Supply Current (LCD) I0 Note (1) : There is tolerance in optimum LCD driving voltage during production and it will be within the specified range. VL-FS- MDLS16119D-01 REV. A (MDLS16119D-LV-DIE IC) OCT/2001 PAGE 9 OF 12 4.3 Timing Specifications At Ta = 0 °C to +50 °C , VDD = 5V±5% ,VSS = 0V. Refer to Fig. 2 , the bus timing diagram for write mode. Table 6 Parameter Enable cycle time Enable ”High” level pulse width Enable rise time Enable fall time RS, R/W set-up time RS, R/W address hold time Data output delay Data hold time Symbol tCYC.


VL-FS-MDLS12433P-01 VL-FS-MDLS16119D-01 VSC7121


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)