(IS25C02 / IS25C04) 2K-BIT/4K-BIT SPI SERIAL ELECTRICALLY ERASABLE PROM
www.DataSheet4U.com
IS25C02 IS25C04
2K-BIT/4K-BIT SPI SERIAL ELECTRICALLY ERASABLE PROM
ISSI
Preliminary Information J...
Description
www.DataSheet4U.com
IS25C02 IS25C04
2K-BIT/4K-BIT SPI SERIAL ELECTRICALLY ERASABLE PROM
ISSI
Preliminary Information January 2006
®
FEATURES
Serial Peripheral Interface (SPI) Compatible — Supports SPI Modes 0 (0,0) and 3 (1,1) Low-voltage Operation — Vcc = 1.8V to 5.5V Low power CMOS — Active current less than 3.0 mA (2.5V) — Standby current less than 1 µA (2.5V) Block Write Protection — Protect 1/4, 1/2, or Entire Array 16 byte page write mode — Partial page writes allowed 10 MHz Clock Rate (5V) Self timed write cycles — 5 ms max. @ 2.5V High-reliability — Endurance: 1 million cycles per byte — Data retention: 100 years 8-pin PDIP, 8-pin SOIC, and 8-pin TSSOP packages are available Lead-free available
DESCRIPTION
The IS25C02 and IS25C04 are electrically erasable PROM devices that use the Serial Peripheral Interface (SPI) for communications. The IS25C02 is 2Kbit (256x 8) and the IS25C04 is 4Kbit (512x 8). The IS25C02/04 EEPROMs are offered in a wide operating voltage range of 1.8V to 5.5V to be compatible with most application voltages. ISSI designed the IS25C02/ 04 to be an efficient SPI EEPROM solution. The devices are packaged in 8-pin PDIP, 8-pin SOIC, and 8pin TSSOP. The functional features of the IS25C02/04 allow them to be among the most advanced serial non-volatile memories available. Each device has a Chip-Select (CS) pin, and a 3-wire interface of Serial Data In (SI), Serial Data Out (SO), and Serial Clock (SCK). While the 3-wire interface o...
Similar Datasheet