IS25C16

www.DataSheet4U.com IS25C08 IS25C16 8K-BIT/16K-BIT SPI SERIAL ELECTRICALLY ERASABLE PROM ISSI Preliminary Information APRIL 2006 ® FEATURES Serial Peripheral Interface (SPI) Compatible — Supports SPI Modes 0 (0,0) and 3 (1,1) Wide-voltage Operation — Vcc = 1.8V to 5.5V Low power CMOS — Active current less than 3.0 mA (2.5V) — Standby current less than 2.0 µA (2.5V) Block Write Protection — Protect 1/4, 1/2, or Entire Array 16 byte page write mode — Partial page writes allowed 10 MHz Clock Rate (5V) Self timed write cycles (5 ms Typical) High-reliability — Endurance: 1 million cycles per byte — Data retention: 100 years Industrial and Automotive temperature ranges 8-pin PDIP, 8-pin SOIC, 8-pin TSSOP, and chip scale packages are available Lead-free available DESCRIPTION The IS25C08 and IS25C16 are electrically erasable PROM devices that use the Serial Peripheral Interface (SPI) for communications. The IS25C08 is 8Kbit (1024x 8) and the IS25C16 is 16Kbit (2048 x 8). The IS25C08/16 EEPROMs are offered in a wide operating voltage range of 1.8V to 5.5V compatible with most application voltages. ISSI designed the IS25C08/16 to be an efficient SPI EEPROM solution. The devices are packaged in 8-pin PDIP, 8-pin SOIC, 8-pin TSSOP, and 8-ball CSP. The functional features of the IS25C08/16 allow them to be among the most advanced serial non-volatile memories available. Each device has a Chip-Select (CS) pin, and a 3-wire interface of Serial Data In (SI), Serial ...