Triple 1.0 GHz Current Feedback Op Amp
NCS2535
Triple 1.4 GHz Current Feedback Op Amp with Enable Feature
NCS2535 is a triple 1.4 GHz current feedback monolit...
Description
NCS2535
Triple 1.4 GHz Current Feedback Op Amp with Enable Feature
NCS2535 is a triple 1.4 GHz current feedback monolithic operational amplifier featuring high slew rate and low differential gain and phase error. The current feedback architecture allows for a superior bandwidth and low power consumption. This device features an enable pin.
Features
−3.0 dB Small Signal BW (AV = +2.0, VO = 0.5 Vp−p) 1.4 GHz Typ Slew Rate 2500 V/ms Supply Current 12 mA per Amplifier Input Referred Voltage Noise 5.0 nV/ǸHz THD −69 dB (f = 5.0 MHz, VO = 2.0 Vp−p) Output Current 120 mA Enable Pin Available This is a Pb−Free Device
Applications
High Resolution Video Line Driver High−Speed Instrumentation Wide Dynamic Range IF Amp
6 3 VOUT = 0.5 VPP
0
−3
−6
−9 AV = +2
−12
VS = ±5 V RF = 330 W
−15 RL = 150 W
10k 100k
VOUT = 1.0 VPP VOUT = 2.0 VPP
1M 10M 100M
FREQUENCY (Hz)
Figure 1. Frequency Response:
Gain (dB) vs. Frequency
Av = +2.0
1G
10G
http://onsemi.com
MARKING DIAGRAM
16
1
TSSOP−16 DT SUFFIX CASE 948F
NCS 2535 ALYWG
G
NCS2535 = Specific Device Code A = Assembly Location L = Wafer Lot Y = Year W = Work Week
G = Pb−Free Package (Note: Microdot may be in either location)
TSSOP−16 PINOUT
−IN1 +IN1
VEE1 −IN2
+IN2 VEE2 −IN3 +IN3
1 2 3 4 5 6 7 8
− +
− +
− +
16 EN1 15 OUT1
14 VCC1 13 EN2 12 OUT2 11 VCC2 10 OUT3 9 EN3
(Top View)
ORDERING INFORMATION
Device
Package
Shipping†
NCS2535DTG
TSSOP−16 96 Units/Rail
NCS2535DTR2G TSSOP−16 2500 Tape & R...
Similar Datasheet