DIM200WKS17-A000

www.DataSheet4U.com DIM200WKS17-A000 DIM200WKS17-A000 IGBT Chopper Module - Upper Arm Control FDS5699-1.1 December 2003 FEATURES I I I 10µs Short Circuit Withstand Non Punch Through Silicon Isolated Copper Baseplate KEY PARAMETERS VCES (typ) VCE(sat) * (max) IC (max) IC(PK) 1700V 2.7V 200A 400A *(measured at the power busbars and not the auxiliary terminals) APPLICATIONS I I I I I Choppers Motor Controllers Induction Heating Resonant Converters Power Supplies 4(G1) 5(E1) 1(K,E) 2(A) 3(C1) The Powerline range of high power modules includes half bridge, chopper, dual, single and bi-directional switch configurations covering voltages from 600V to 3300V and currents up to 3600A. The DIM200WKS17-A000 is a 1700V, n channel enhancement mode, insulated gate bipolar transistor (IGBT) chopper module configured with the upper arm of the bridge controlled. The IGBT has a wide reverse bias safe operating area (RBSOA) plus full 10µs short circuit withstand. The module incorporates an electrically isolated base plate and low inductance construction enabling circuit designers to optimise circuit layouts and utilise grounded heat sinks for safety. Fig. 1 Chopper circuit diagram ORDERING INFORMATION Order As: DIM200WKS17-A000 Note: When ordering, please use the whole part number. Outline type code: W (See package details for further information) Fig. 2 Module outline Caution: This device is sensitive to electrostatic discharge. Users should follow ESD handling procedures. 1/8 ww...