8-Pin uP Supervisory Circuits
19-1086; Rev 1; 11/05
MAX801L/M/N, MAX808L/M/N
8-Pin µP Supervisory Circuits with ±1.5% Reset Accuracy
______________...
Description
19-1086; Rev 1; 11/05
MAX801L/M/N, MAX808L/M/N
8-Pin µP Supervisory Circuits with ±1.5% Reset Accuracy
_______________General Description
The MAX801/MAX808 microprocessor (µP) supervisory circuits monitor and control the activities of +5V µPs by providing backup-battery switchover, low-line indication, and µP reset. Additional features include a watchdog for the MAX801 and CMOS RAM write protection for the MAX808. The MAX801/MAX808 offer a choice of reset-threshold voltage (denoted by suffix letter): 4.675V (L), 4.575V (N), and 4.425V (M). These devices are available in 8-pin DIP and SO packages.
________________________Applications
Computers
Controllers
Intelligent Instruments
Critical µP Power Monitoring
Portable/Battery-Powered Equipment
Embedded Systems
Pin Configurations appear at end of data sheet.
__________Typical Operating Circuit
+5V 0.1μF
0.1μF
VCC OUT
BATT 0.1μF
LOWLINE RESET
MAX808
CE IN
CE OUT GND
POWER FOR μP CMOS RAM POWER NMI
RESET
µP SYSTEM
FROM I/O SYSTEM OR ADDRESS DECODER
TO CMOS RAM
____________________________Features
♦ Precision Voltage Monitoring, ±1.5% Reset Accuracy
♦ 200ms Power-OK/Reset Time Delay
♦ RESET Output (MAX808) RESET and RESET Outputs (MAX801)
♦ Watchdog Timer (MAX801)
♦ On-Board Gating of Chip-Enable Signals (MAX808): Memory Write-Cycle Completion 3ns CE Gate Propagation Delay
♦ 1µA Standby Current
♦ Power Switching: 250mA in VCC Mode 20mA in Battery-Backup Mode
♦ MaxCap™/SuperCap™ Compatible
♦ RESET Guaranteed Valid to VCC...
Similar Datasheet