PFC/PWM Combo Controller
NCP1603
PFC/PWM Combo Controller
with Integrated High
Voltage Startup and Standby
Capability
The NCP1603 is a Power Fac...
Description
NCP1603
PFC/PWM Combo Controller
with Integrated High
Voltage Startup and Standby
Capability
The NCP1603 is a Power Factor Correction (PFC) and Pulse Width Modulation (PWM) combo controller. It offers extremely low no−load standby power consumption that is suitable for the low−power consumer markets. The key features of the device are listed below.
Features
This is a Pb−Free Device*
PFC Features
Near−Unity Power Factor in Discontinuous and Critical Mode
(DCM and CRM)
Voltage−Mode Operation Low Startup and Shutdown Current Consumption Programmable Switching Frequency for DCM Synchronization Capability Overvoltage Protection (107% of Nominal Output Level) Undervoltage Protection or Shutdown
(8% of Nominal Output Level)
Programmable Overcurrent Protection Thermal Shutdown with Hysteresis (95/140°C) Undervoltage Lockout with Hysteresis (9.0/10.5 V)
PWM Features
Integrated Lossless High Voltage Startup Current Source 100 kHz PWM Current−Mode Operation with Skipping Cycle
Capability During Standby Condition
PFC Bias Voltage is Disabled in Standby Condition to Achieve
Extremely Low No−Load Standby Power Consumption
Fault Protection Implemented by a Timer and Independent of Badly
Coupled Auxiliary Transformer Winding
Primary Overcurrent Protection and Latched Overvoltage Protection Internal 2.5 ms Soft−Start "6.4% Frequency Jittering for Improved EMI Performance Latched Thermal Shutdown with Hysteresis (140/165°C) Undervoltage Lockout with Hys...
Similar Datasheet