1-of-2 Decoder/Demultiplexer
1-to-2 Decoder/ Demultiplexer
NL7SZ19
The NL7SZ19 is a 1−to−2 decoder. When the output enable (E) is Low, the device pa...
Description
1-to-2 Decoder/ Demultiplexer
NL7SZ19
The NL7SZ19 is a 1−to−2 decoder. When the output enable (E) is Low, the device passes data at input A to outputs Y0 (true) and Y1 (complement). The NL7SZ19 can also be used as a 1−to−2 demultiplexer. As a demultiplexer, data at input E is routed to either Y0 or Y1 depending on the state of A. The device operates over the voltage range from 1.65 V to 5.5 V.
Features
Designed for 1.65 V to 5.5 V VCC Operation 2.7 ns tPD at VCC = 5 V (Typ) Inputs/Outputs Overvoltage Tolerant up to 5.5 V IOFF Supports Partial Power Down Protection Sink 32 mA at 5.0 V Available in SC−88, SC−74 and UDFN6 Packages Chip Complexity < 100 FETs NLV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
A1
6 Y0
GND 2
5 VCC
E3
4 Y1
SC−88 / SC−74
www.onsemi.com
MARKING DIAGRAMS
6
SC−88 DF SUFFIX CASE 419B
XXXM G G
1
1
SC−74 CASE 318F−05
XXX MG G
1
UDFN6, 1.2x1.0, 0.4P
CASE 517AA−01
XM
1
X, XXX = Specific Device Code
M
= Date Code*
G
= Pb−Free Package
(Note: Microdot may be in either location)
*Date Code orientation and/or position may vary depending upon manufacturing location.
ORDERING INFORMATION
See detailed ordering, marking and shipping information in the package dimensions section on page 6 of this data sheet.
A1
6 Y0
GND 2
5 VCC
E3
4 Y1
UDFN6 Figure 1. Pinout ...
Similar Datasheet