CRD4412 Datasheet: 2 x 15 W Digital Power Stage Reference Design





CRD4412 2 x 15 W Digital Power Stage Reference Design Datasheet

Part Number CRD4412
Description 2 x 15 W Digital Power Stage Reference Design
Manufacture Cirrus Logic
Total Page 15 Pages
PDF Download Download CRD4412 Datasheet PDF

Features: www.DataSheet4U.com CRD4412 2 x 15 W CS 4412 Digital Power Stage Reference Desi gn Features  Pre-Configured for Stere o Full-Bridge Description The CRD4412 demonstrates the CS4412 digital amplifi er power stage. This reference design i s preconfigured as a two-channel full-b ridge power stage which delivers 15 W p er channel into 8 Ω loads using a sing le +18 V supply. The design can be easi ly configured to operate as a single ch annel parallel full-bridge power stage capable of delivering 30 W into a 4 Ω load from an +18 V supply. The CRD4412 can be powered from +9 V to +18 V The C RD4412 is designed to operate in conjun ction with the CRD4525. When connected, the combination implements a 2.1 confi guration with the CRD4412 operating in mono parallel full-bridge mode. The CRD 4412 can also be operated without an at tached CRD4525. In this configuration, all input/output connections are achiev ed through the CRD4412 interface header . The PWM audio power outputs are routed through an inductor/capac.

Keywords: CRD4412, datasheet, pdf, Cirrus Logic, 2, x, 15, W, Digital, Power, Stage, Reference, Design, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent

www.DataSheet4U.com
CRD4412
2 x 15 W CS4412 Digital Power Stage Reference Design
Features
 Pre-Configured for Stereo Full-Bridge
Operation
– Delivers 15 W/Ch into 8 Ω at 10 % THD+N
 Easily Configurable for Mono Parallel Full-
Bridge Operation
– Delivers 30 W into 4 Ω at 10 % THD+N
 Directly Connects to CRD4525 Digital Amplifier
Reference Design
– Implements a 2.1 Configuration
 Flexible I/O Provided
– PWM Logic Level Signal Inputs
– CS4412 Error and Warning Signals
 Operates from +9 V to +18 V and +3.3 V
 Demonstrates Recommended Layout and
Grounding Arrangements
 Implements Recommended PWM Output
Filtering
Description
The CRD4412 demonstrates the CS4412 digital ampli-
fier power stage. This reference design is pre-
configured as a two-channel full-bridge power stage
which delivers 15 W per channel into 8 Ω loads using a
single +18 V supply. The design can be easily config-
ured to operate as a single channel parallel full-bridge
power stage capable of delivering 30 W into a 4 Ω load
from an +18 V supply. The CRD4412 can be powered
from +9 V to +18 V
The CRD4412 is designed to operate in conjunction
with the CRD4525. When connected, the combination
implements a 2.1 configuration with the CRD4412 oper-
ating in mono parallel full-bridge mode.
The CRD4412 can also be operated without an at-
tached CRD4525. In this configuration, all input/output
connections are achieved through the CRD4412 inter-
face header.
The PWM audio power outputs are routed through an
inductor/capacitor 2nd order low-pass filter (LPF) to re-
move high frequency components from the output
signal, effectively converting it from digital to analog.
ORDERING INFORMATION
CRD4412
CS4412 Reference Design
Mono
Parallel
Full-Bridge
Right PWM
Left PWM
Stereo
Full-Bridge
Over Current Error
Under Voltage/Temp Error
Thermal Warning
Power
Reset
CS4412
Output
Filter
Output
Filter
http://www.cirrus.com
Copyright © Cirrus Logic, Inc. 2006
(All Rights Reserved)
DECEMBER '06
DS749RD1

                    
                    






Index : 0  1  2  3   4  5  6  7   8  9  A  B   C  D  E  F   G  H  I  J   K  L  M  N   O  P  Q  R   S  T  U  V   W  X  Y  Z
@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)