Single-phase Power/Energy IC
CS5464
Three-channel, Single-phase Power/Energy IC
Features & Description
• Energy Linearity: ±0.1% of Reading over 10...
Description
CS5464
Three-channel, Single-phase Power/Energy IC
Features & Description
Energy Linearity: ±0.1% of Reading over 1000:1 Dynamic Range
On-chip Functions:
- Voltage and Current Measurement - Active, Reactive, and Apparent Power/Energy - RMS Voltage and Current Calculations - Current Fault and Voltage Sag Detection - Calibration - Phase Compensation - Temperature Sensor - Energy Pulse Outputs
Meets Accuracy Spec for IEC, ANSI, & JIS
Low Power Consumption Tamper Detection and Correction Ground-referenced Inputs with Single
Supply
On-chip 2.5 V Reference (40 ppm / °C typ.)
Power Supply Monitor Function
Three-wire Serial Interface to Microcontroller or E2PROM
Power Supply Configurations
GND: 0 V, VA+: +5 V, VD+: +3.3 V to +5 V
Description
The CS5464 is a watt-hour meter on a chip. It measures line voltage and current and calculates active, reactive, apparent power, energy, power factor, and RMS voltage and current.
There are two separate inputs to measure line, ground, and/or neutral current enabling the meter to detect tampering and to continue operating. An internal RMS voltage reference can be used if voltage measurement is disabled by tampering.
Four analog-to-digital converters are used to measure voltage, two currents, and temperature.
The CS5464 is designed to interface to a variety of voltage and current sensors.
Additional features include system-level calibration, voltage sag and current fault detection, peak detection, phase compensation, and e...
Similar Datasheet