www.DataSheet4U.com
AP1519
300KHz, 2A PWM Buck DC/DC Converter Features
- Adjustable version output voltage range, 0....
www.DataSheet4U.com
AP1519
300KHz, 2A PWM Buck DC/DC Converter Features
- Adjustable version output voltage range, 0.8V to 18V+4% - 300KHz +15% fixed switching frequency - Voltage mode non-synchronous PWM control - Thermal-shutdown and current-limit protection - ON/OFF shutdown control input - Operating voltage can be up to 22V - Output load current: 2A - SOP-8L Pb-Free packages - Low power standby mode - Built-in switching
transistor on chip
General Description
The AP1519 is monolithic IC designed for a step-down DC/DC converter, and own the ability of driving a 2A load without additional
transistor. It saves board space. The external shutdown function can be controlled by logic level and then come into standby mode. The internal compensation makes feedback control having good line and load regulation without external design. Regarding protected function, thermal shutdown is to prevent over temperature operating from damage, and current limit is against over current operating of the output switch. If current limit function occurs and VFB is down below 0.5V, the switching frequency will be reduced. The AP1519 series operates at a switching frequency of 300KHz thus allows smaller sized filter components than what would be needed with lower frequency switching
regulators. Other features include a guaranteed +4% tolerance on output voltage under specified input voltage and output load conditions, and +15% on the oscillator frequency. The chips are available in a standard 8...