U U
LT1072
1.25A High Efficiency Switching Regulator
FEATURES
■ Available in MiniDiP, TO-220, and TO-3 Packages ■ Wide...
U U
LT1072
1.25A High Efficiency Switching
Regulator
FEATURES
■ Available in MiniDiP, TO-220, and TO-3 Packages ■ Wide Input Voltage Range 3V to 60V ■ Low Quiescent Current—6mA ■ Internal 1.25A Switch ■ Very Few External Parts Required ■ Self-Protected Against Overloads ■ Operates in Nearly All Switching Topologies ■ Shutdown Mode Draws Only 50µA Supply Current ■ Flyback-Regulated Mode has Fully Floating Outputs ■ Can be Externally Synchronized
U APPLICATIO S
■ Logic Supply 5V at 2.5A ■ 5V Logic to ±15V Op Amp Supply ■ Offline Converter up to 50W ■ Battery Upconverter ■ Power lnverter (+ to –) or (– to +) ■ Fully Floating Multiple Outputs ■ Driver for High Current Supplies
USER NOTE: This data sheet is only intended to provide specifications, graphs, and a general functional description of the LT1072. Application circuits are included to show the capability of the LT1072. A complete design manual (AN-19) should be obtained to assist in developing new designs. This manual contains a comprehensive discussion of both the LT1070 and the external components used with it, as well as complete formulas for calculating the values of these components. The manual can also be used for the LT1072 by factoring in the lower switch current rating.
, LTC and LT are registered trademarks of Linear Technology Corporation.
DESCRIPTIO
The LT®1072 is a monolithic high power switching
regulator. It can be operated in all standard switching configurations including buck, boost, flyback, forward, ...