DatasheetsPDF.com

EM4450 Dataheets PDF



Part Number EM4450
Manufacturers EM Microelectronic
Logo EM Microelectronic
Description (EM4450 / EM4550) 1 KBit Read/Write Contactless Identification Device
Datasheet EM4450 DatasheetEM4450 Datasheet (PDF)

www.DataSheet4U.com EM MICROELECTRONIC - MARIN SA EM4450 EM4550 1 KBit Read/Write Contactless Identification Device Description The EM4450/4550 is a CMOS integrated circuit intended for use in electronic Read/Write RF Transponders. The difference between EM4450 and EM4550 is that EM4550 are bumped and has megapads for the two coils. The chip contains 1 KBit of EEPROM which can be configured by the user, allowing a write inhibited area, a read protected area, and a read area output continuousl.

  EM4450   EM4450



Document
www.DataSheet4U.com EM MICROELECTRONIC - MARIN SA EM4450 EM4550 1 KBit Read/Write Contactless Identification Device Description The EM4450/4550 is a CMOS integrated circuit intended for use in electronic Read/Write RF Transponders. The difference between EM4450 and EM4550 is that EM4550 are bumped and has megapads for the two coils. The chip contains 1 KBit of EEPROM which can be configured by the user, allowing a write inhibited area, a read protected area, and a read area output continuously at power on. The memory can be secured by using the 32 bit password for all write and read protected operations. The password can be updated, but never read. The fixed code serial number and device identification are laser programmed making every chip unique. The EM4450/4550 will transmit data to the transceiver by modulating the amplitude of the electromagnetic field, and receive data and commands in a similar way. Simple commands will enable to write EEPROM, to update the password, to read a specific memory area, and to reset the logic. The coil of the tuned circuit is the only external component required, all remaining functions are integrated in the chip. Features 1 KBit of EEPROM organized in 32 words of 32 bits 32 bit Device Serial Number (Read Only Laser ROM) 32 bit Device Identification (Read Only Laser ROM) Power-On-Reset sequence Power Check for EEPROM write operation User defined Read Memory Area at Power On User defined Write Inhibited Memory Area User defined Read Protected Memory Area Data Transmission performed by Amplitude Modulation Two Data Rate Options 2 KBd (Opt64) or 4 KBd (Opt32) Bit Period = 64 or 32 periods of field frequency 170 pF ± 2% on chip Resonant Capacitor -40 to +85°C Temperature range 100 to 150 kHz Field Frequency range On chip Rectifier and Voltage Limiter No external supply buffer capacitance needed due to low power consumption Available in chip form for mass production and PCB and CID package for samples. Applications Ticketing Automotive Immobilizer with rolling code High Security Hands Free Access Control Industrial automation with portable database Manufacturing automation Prepayment Devices Typical Operating Configuration Coil2 L EM4450 Coil1 Typical value of inductance at 125 kHz is 9.6 mH Fig.1 Copyright  2003, EM Microelectronic-Marin SA 1 www.emmicroelectronic.com EM4450 EM4550 Block Diagram Modulator Encoder ROM EEPROM +V coil2 coil1 Cr AC/DC converter Voltage Regulator Cs Pow er Control Reset Write Enable Clock Extractor Data Extractor Sequencer Command Decoder Control Logic Fig. 2 System Principle Transceiver Data to be sent to transponder Modulator Transponder Oscillator Antenna Driver Coil 1 EM4450 Data Decoder Filter & Gain Demodulator Coil 2 Data received from transponder RECEIVE M ODE Signal on Transponder coil READ M ODE Signal on Transceiver coil Signal on Transceiver coil Signal on Transponder coil RF Carrier Data RF Carrier Data Fig. 3 Copyright  2003, EM Micr.


EM4444 EM4450 EM4550


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)