Quad 2-Input Multiplexer
www.DataSheet4U.com
54AC257 • 54ACT257 Quad 2-Input Multiplexer with TRI-STATE Outputs
July 1998
54AC257 • 54ACT257 Q...
Description
www.DataSheet4U.com
54AC257 54ACT257 Quad 2-Input Multiplexer with TRI-STATE Outputs
July 1998
54AC257 54ACT257 Quad 2-Input Multiplexer with TRI-STATE ® Outputs
General Description
The ’AC/’ACT257 is a quad 2-input multiplexer with TRI-STATE outputs. Four bits of data from two sources can be selected using a Common Data Select input. The four outputs present the selected data in true (noninverted) form. The outputs may be switched to a high impedance state by placing a logic HIGH on the common Output Enable (OE) input, allowing the outputs to interface directly with bus-oriented systems.
Features
n n n n n n ICC and IOZ reduced by 50% Multiplexer expansion by tying outputs together Noninverting TRI-STATE outputs Outputs source/sink 24 mA ’ACT257 has TTL-compatible inputs Standard Military Drawing (SMD) — ’AC257: 5962-88703 — ’ACT257: 5962-89689
Logic Symbols
IEEE/IEC
DS100286-1
DS100286-2
Pin Names S OE I0a–I0d I1a–I1d Za–Zd
Description Common Data Select Input TRI-STATE Output Enable Input Data Inputs from Source 0 Data Inputs from Source 1 TRI-STATE Multiplexer Outputs
TRI-STATE ® is a registered trademark of National Semiconductor Corporation. FACT™ is a trademark of Fairchild Semiconductor Corporation.
© 1998 National Semiconductor Corporation
DS100286
www.national.com
Connection Diagrams
Pin Assignment for DIP and Flatpak
Functional Description
The ’AC/’ACT257 is quad 2-input multiplexer with TRI-STATE outputs. It selects four bits of data from two so...
Similar Datasheet