Octal Buffer/Line Driver
www.DataSheet4U.com
54AC541 Octal Buffer/Line Driver with TRI-STATE Outputs
July 1998
54AC541 Octal Buffer/Line Drive...
Description
www.DataSheet4U.com
54AC541 Octal Buffer/Line Driver with TRI-STATE Outputs
July 1998
54AC541 Octal Buffer/Line Driver with TRI-STATE ® Outputs
General Description
The ’AC541 is an octal buffer/line driver designed to be employed as memory and address drivers, clock drivers and bus oriented transmitter/receivers. The ’AC541 is a noninverting option of the ’AC540. This device is similar in function to the ’AC244 while providing flow-through architecture (inputs on opposite side from outputs). This pinout arrangement makes this device especially useful as an output port for microprocessors, allowing ease of layout and greater PC board density.
Features
n ICC and IOZ reduced by 50% n TRI-STATE outputs n Inputs and outputs opposite side of package, allowing easier interface to microprocessors n Output source/sink 24 mA n ’AC540 provides inverted outputs n Standard Military Drawing (SMD) — ’AC541: 5962-88706
Logic Symbol
IEEE/IEC
DS100330-3
Truth Table
Inputs OE1 L H X L
H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial Z = High Impedance
Outputs I H X X L H Z Z L
OE2 L X H L
TRI-STATE ® is a registered trademark of National Semiconductor Corporation. FACT™ is a trademark of Fairchild Semiconductor Corporation.
© 1998 National Semiconductor Corporation
DS100330
www.national.com
Connection Diagrams
Pin Assignment for DIP and Flatpak
Pin Assignment for LCC
DS100330-1
DS100330-2
www.national.com
2
Absolute Maximum Ratings (Note 1)
If Military/Aerospace s...
Similar Datasheet