Document
www.DataSheet4U.com
54ACQ244 • 54ACTQ244 Quiet Series Octal Buffer/Line Driver with TRI-STATE Outputs
August 1998
54ACQ244 • 54ACTQ244 Quiet Series Octal Buffer/Line Driver with TRI-STATE ® Outputs
General Description
The ’ACQ/’ACTQ244 is an octal buffer and line driver designed to be employed as a memory address driver, clock driver and bus oriented transmitter or receiver which provides improved PC board density. The ACQ/ACTQ utilizes NSC Quiet Series technology to guarantee quiet output switching and improved dynamic threshold performance. FACT Quiet Series™ features GTO™ output control and undershoot corrector in addition to a split ground bus for superior performance. n Guaranteed simultaneous switching noise level and dynamic threshold performance n Improved latch-up immunity n TRI-STATE outputs drive bus lines or buffer memory address registers n Outputs source/sink 24 mA n Faster prop delays than the standard ’AC/’ACT244 n 4 kV minimum ESD immunity n Standard Microcircuit Drawing (SMD) — ’ACTQ244: 5962-92186 — ’ACQ244: 5962-92176
Features
n ICC and IOZ reduced by 50%
Logic Symbol
IEE/IEC
Connection Diagrams
Pin Assignment for DIP and Flatpak
DS100236-1
DS100236-2
Pin Names OE1, OE2 I0–I 7 O0–O 7 Inputs Outputs
Description TRI-STATE Output Enable Inputs
Pin Assignment for LCC
DS100236-3
GTO™ is a trademark of National Semiconductor Corporation. TRI-STATE ® is a registered trademark of National Semiconductor Corporation. FACT ® is a registered trademark of Fairchild Semiconductor Corporation. FACT Quiet Series™ is a trademark of Fairchild Semiconductor Corporation.
© 1998 National Semiconductor Corporation
DS100236
www.national.com
Truth Tables
Inputs OE1 L L H Inputs OE2 L L H
H = HIGH Voltage Level L = LOW Voltage Level X = Immaterial Z = High Impedance
Outputs In L H X (Pins 12, 14, 16, 18) L H Z Outputs In L H X (Pins 3, 5, 7, 9) L H Z
www.national.com
2
Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage (VCC) DC Input Diode Current (IIK) VI = −0.5V VI = VCC + 0.5V DC Input Voltage (VI) DC Output Diode Current (IOK) VO = −0.5V VO = VCC + 0.5V DC Output Voltage (VO) DC Output Source or Sink Current (IO) DC VCC or Ground Current per Output Pin (ICC or IGND) Storage Temperature (TSTG) DC Latch-Up Source or Sink Current Junction Temperature (TJ) CDIP −0.5V to +7.0V −20 mA +20 mA −0.5V to VCC + 0.5V −20 mA +20 mA −0.5V to VCC + 0.5V
Recommended Operating Conditions
Supply Voltage (VCC) ’ACQ ’ACTQ Input Voltage (VI) Output Voltage (VO) Operating Temperature (TA) 54ACQ/ACTQ Minimum Input Edge Rate ∆V/∆t ’ACQ Devices VIN from 30% to 70% of VCC VCC @ 3.0V, 4.5V, 5.5V Minimum Input Edge Rate ∆V/∆t ’ACTQ Devices VIN from 0.8V to 2.0V VCC @ 4.5V, 5.5V 2.0V to 6.0V 4.5V to 5.5V 0V to VCC 0V to VCC −55˚C to +125˚C
125 mV/ns
± 50 mA ± 50 mA −65˚C to +150˚C ± 300 mA
175˚C
125 mV/ns
Note 1: Absolute maximum ratings are those values beyond which damage to the device may occur. The databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. National does not recommend operation of FACT ® circuits outside databook specifications. Note 2: All commercial packaging is not recommended for applications requiring greater than 2000 temperature cycles from −40˚C to +125˚C.
DC Electrical Characteristics for ’ACQ Family Devices
Symbol Parameter VCC (V) VIH Minimum High Level Input Voltage VIL Maximum Low Level Input Voltage VOH Minimum High Level Output Voltage 3.0 4.5 5.5 3.0 4.5 5.5 3.0 4.5 5.5 54ACQ TA = −55˚C to +125˚C Guaranteed Limits 2.1 3.15 3.85 0.9 1.35 1.65 2.9 4.4 5.4 (Note 3) VIN = VIL or VIH 3.0 4.5 5.5 VOL Maximum Low Level Output Voltage 3.0 4.5 5.5 2.4 3.7 4.7 0.1 0.1 0.1 (Note 3) VIN = VIL or VIH 3.0 4.5 5.5 IIN Maximum Input Leakage Current 5.5 0.50 0.50 0.50 V µA IOL = 12 mA IOL = 24 mA IOL = 24 mA VI = VCC, GND (Note 5) V V IOH = −12 mA IOH = −24 mA IOH = −24 mA IOUT = 50 µA V IOUT = −50 µA V VOUT = 0.1V or VCC − 0.1V V VOUT = 0.1V or VCC − 0.1V Units Conditions
± 1.0
3
www.national.com
DC Electrical Characteristics for ’ACQ Family Devices
Symbol Parameter VCC (V) IOLD IOHD ICC IOZ Minimum Dynamic (Note 4) Output Current Maximum Quiescent Supply Current Maximum TRI-STATE Leakage Current VOLP VOLV Quiet Output Maximum Dynamic VOL Quiet Output Minimum Dynamic VOL
Note 3: All outputs loaded thresholds on input associated with output under test. Note 4: Maximum test duration 2.0 ms, one output loaded at a time. Note 5: IIN and ICC @ 3.0V are guaranteed to be less than or equal to the respective limit @ 5.5V VCC. ICC for 54ACQ @ 25˚C is identical to 74ACQ @ 25˚C. Note 6: Plastic DIP package. Note 7: Max number of outputs defined as (n). Data Inputs are driven 0V to 5V. One output @ GND.
(Continued)
54ACQ TA = −.