NCP580
Ultra-Fast, Low Noise 120 mA CMOS LDO Regulator with Enable
The NCP580 series of low dropout regulators are desig...
NCP580
Ultra-Fast, Low Noise 120 mA CMOS LDO
Regulator with Enable
The NCP580 series of low dropout
regulators are designed for portable battery powered applications which require precise output voltage accuracy, low quiescent current, and high ripple rejection. These devices feature an enable function which lowers current consumption significantly and are offered in the small SC-82AB package.
A 2.2 mF ceramic capacitor or higher is the recommended value to be used with these devices on the output pin.
Features
ăUltra-Low Dropout Voltage of 150 mV at 100 mA ăLow Output Noise of 30 mVrms without Noise Reduction Cap ăExcellent Line Regulation of 0.02%/V ăExcellent Load Regulation of 12 mV ăHigh Output Voltage Accuracy of "1.5% ăLow Iq Current of 90 mA ăVery Low Shutdown Current of 0.1 mA ăExcellent Power Supply Rejection Ratio of 70 dB at f = 1.0 kHz ăWide Output Voltage Range of 1.5 V to 3.3 V ăFold Back Protection Circuit ăFast Dynamic Performance ăLow Temperature Drift Coefficient on the Output Voltage of
"100 ppm/°C
ăInput Voltage up to 6.5 V ăThese are Pb-Free Devices
Typical Applications
ăPortable Equipment ăHand-Held Instrumentation ăCamcorders and Cameras
http://onsemi.com
MARKING DIAGRAM
4 1
SC-82AB SQ SUFFIX CASE 419C
1
M
xxx MĂG G
xxx = Device Code M = Date Code* G = Pb-Free Package
(Note: Microdot may be in either location)
*Date Code orientation and/or position may vary depending upon manufacturing location.
ORDERING INFORMATION
See detaile...