DatasheetsPDF.com

MAX4213 Dataheets PDF



Part Number MAX4213
Manufacturers Maxim
Logo Maxim
Description (MAX4212 - MAX4220) Miniature / 300MHz / Single-Supply / Rail-to-Rail Op Amps
Datasheet MAX4213 DatasheetMAX4213 Datasheet (PDF)

19-1178; Rev 1; 6/98 L MANUA ION KIT HEET T A U L EVA TA S WS DA FOLLO Miniature, 300MHz, Single-Supply, Rail-to-Rail Op Amps with Enable Features o High Speed: 300MHz -3dB Bandwidth (MAX4212/13) 200MHz -3dB Bandwidth (MAX4216/18/20) 50MHz 0.1dB Gain Flatness (MAX4212/13) 600V/µs Slew Rate o Single 3.3V/5.0V Operation o Rail-to-Rail Outputs o Input Common-Mode Range Extends Beyond VEE o Low Differential Gain/Phase: 0.02%/0.02° o Low Distortion at 5MHz: -78dBc SFDR -75dB Total Harmonic Distorti.

  MAX4213   MAX4213



Document
19-1178; Rev 1; 6/98 L MANUA ION KIT HEET T A U L EVA TA S WS DA FOLLO Miniature, 300MHz, Single-Supply, Rail-to-Rail Op Amps with Enable Features o High Speed: 300MHz -3dB Bandwidth (MAX4212/13) 200MHz -3dB Bandwidth (MAX4216/18/20) 50MHz 0.1dB Gain Flatness (MAX4212/13) 600V/µs Slew Rate o Single 3.3V/5.0V Operation o Rail-to-Rail Outputs o Input Common-Mode Range Extends Beyond VEE o Low Differential Gain/Phase: 0.02%/0.02° o Low Distortion at 5MHz: -78dBc SFDR -75dB Total Harmonic Distortion o High Output Drive: ±100mA o 400µA Shutdown Capability (MAX4213/18) o High Output Impedance in Off State (MAX4213/18) o Space-Saving SOT23-5, µMAX, or QSOP Packages General Description The MAX4212/MAX4213 single, MAX4216 dual, MAX4218 triple, and MAX4220 quad op amps are unity-gain-stable devices that combine high-speed performance with rail-to-rail outputs. The MAX4213/ MAX4218 have a disable feature that reduces powersupply current to 400µA and places the outputs into a high-impedance state. These devices operate from a +3.3V to +10V single supply or from ±1.65V to ±5V dual supplies. The common-mode input voltage range extends beyond the negative power-supply rail (ground in single-supply applications). These devices require only 5.5mA of quiescent supply current while achieving a 300MHz -3dB bandwidth and a 600V/µs slew rate. Input voltage noise is only 10nV/√Hz and input current noise is only 1.3pA/√Hz for either the inverting or noninverting input. These parts are an excellent solution in low-power/low-voltage systems that require wide bandwidth, such as video, communications, and instrumentation. In addition, when disabled, their high output impedance makes them ideal for multiplexing applications. The MAX4212 comes in a miniature 5-pin SOT23 package, while the MAX4213/MAX4216 come in 8-pin µMAX and SO packages. The MAX4218/MAX4220 are available in a space-saving 16-pin QSOP, as well as a 14-pin SO. MAX4212/MAX4213/MAX4216/MAX4218/MAX4220 Ordering Information PART MAX4212EUK MAX4213ESA MAX4213EUA TEMP. RANGE -40°C to +85°C -40°C to +85°C -40°C to +85°C PINPACKAGE 5 SOT23-5 8 SO 8 µMAX SOT TOP MARK ABAF — — Applications Battery-Powered Instruments Video Line Driver Analog-to-Digital Converter Interface CCD Imaging Systems Video Routing and Switching Systems Ordering Information continued at end of data sheet. Typical Operating Circuit TOP VIEW RF 24Ω OUT 1 RTO 50Ω ZO = 50Ω VOUT VEE 2 RO 50Ω 5 VCC Pin Configuration N.C. 1 IN- 2 IN+ 3 8 EN VCC OUT N.C. MAX4212 MAX4213 7 6 5 MAX4212 IN RTIN 50Ω IN+ 3 4 IN- VEE 4 UNITY-GAIN LINE DRIVER (RL = RO + RTO) SOT23-5 µMAX/SO Pin Configurations continued at end of data sheet. 1 ________________________________________________________________ Maxim Integrated Products For free samples & the latest literature: http://www.maxim-ic.com, or phone 1-800-998-8800. For small orders, phone 1-800-835-8769. Miniature, 300MHz, Single-Supply, Rail-to-Rail Op Amps with Enable MAX4212/MAX4213/MAX4216/MAX4218/MAX4220 ABSOLUTE MAXIMUM RATINGS Supply Voltage (VCC to VEE)................................................+12V IN_-, IN_+, OUT_, EN_ .....................(VEE - 0.3V) to (VCC + 0.3V) Output Short-Circuit Duration to VCC or VEE ............. Continuous Continuous Power Dissipation (TA = +70°C) 5-Pin SOT23 (derate 7.1mW/°C above +70°C) ...........571mW 8-Pin SO (derate 5.9mW/°C above +70°C) .................471mW 8-Pin µMAX (derate 4.5mW/°C above +70°C) ............221mW 14-Pin SO (derate 8.3mW/°C above +70°C) ...............667mW 16-Pin QSOP (derate 8.3mW/°C above +70°C) ..........667mW Operating Temperature Range ...........................-40°C to +85°C Storage Temperature Range .............................-65°C to +150°C Lead Temperature (soldering, 10sec) .............................+300°C Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or at any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. DC ELECTRICAL CHARACTERISTICS (VCC = +5V, VEE = 0V, EN_ = +5V, RL = 2kΩ to VCC / 2, VOUT = VCC / 2, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) PARAMETER Input Common-Mode Voltage Range Input Offset Voltage (Note 1) Input Offset Voltage Temperature Coefficient Input Offset Voltage Matching Input Bias Current Input Offset Current Input Resistance Common-Mode Rejection Ratio Open-Loop Gain (Note 1) IB IOS RIN CMRR AVOL SYMBOL VCM VOS TCVOS Any channels for MAX4216/MAX4218/ MAX4220 (Note 1) (Note 1) Differential mode (-1V ≤ VIN ≤ +1V) Common mode (-0.2V ≤ VCM ≤ +2.75V) (VEE - 0.2V) ≤ VCM ≤ (VCC - 2.25V) 0.25V ≤ VOUT ≤ 4.75V, RL = 2kΩ 0.5V ≤ VOUT ≤ 4.5V, RL = 150Ω 1.0V ≤ VOUT ≤ 4V, RL = 50Ω RL = 10kΩ RL = 2kΩ Output Voltage Swing VOUT RL = 150.


MAX1338 MAX4213 MAX4216


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)