www.DataSheet4U.com
SDP8304/8314
Optoschmitt Detector Open-Collector Output
FEATURES • Side-looking plastic package
• ...
www.DataSheet4U.com
SDP8304/8314
Optoschmitt Detector Open-Collector Output
FEATURES Side-looking plastic package
55¡ (nominal) acceptance angle TTL/LSTTL/CMOS compatible Open collector output Buffer (SDP8304) or inverting (SDP8314) logic available High noise immunity output Mechanically and spectrally matched to SEP8506 and SEP8706 infrared emitting diodes
INFRA--8.TIF
DESCRIPTION The SDP8304/8314 series consists of a high speed IC molded in a side-looking black plastic package to minimize the effect of visible ambient light. The detector incorporates a Schmitt trigger which provides pulse shaping and hysteresis for noise immunity. Output rise and fall times are independent of rate of change of incident light. Detector sensitivity has been internally temperature compensated. The output stage is an open collector
NPN transistor. This configuration allows the sensor to interface with circuit elements driven by supply voltages other than the VÙÙ supply. For additional output configuration options refer to SDP8004/8014 and SDP8604/8614. Device Polarity: Buffer - Output is HI when incident light intensity is above the turn- on threshold level. Inverter - Output is LO when incident light intensity is above the turn- on threshold level.
OUTLINE DIMENSIONS in inches (mm) Tolerance 3 plc decimals ±0.005(0.12) 2 plc decimals ±0.020(0.51)
.175 (4.45) .060 (1.52) .030 (0.76)
.060 (1.52)
.045 (1.14) .020 SQ. 3 PLCS (0.51)
.225 (5.72)
GND Vo
~ ~ ~ ~ ~ Vcc ~
.045(...