Document
This material and the information herein is the property of Fuji Electric Co.,Ltd. They shall be neither reproduced, copied, lent, or disclosed in any way whatever for the use of any t h ird pa rt y n o r u s ed f o r th e m an uf a c tu rin g p u rp o se s wit h o u t the express written consent Fuji Electric Co.,Ltd.
DATE
S P E C I F I C AT I O N
: Schottky Barrier Diode
DWG.NO.
CHECKED SEP.-05-‘03
DRAWN SEP.-05-‘03
SEP.-05-‘03
NAME
www.DataSheet4U.com
Device Name
Spec. No.
Type Name
Model Name
APPROVED
: SILICON DIODE
: MS5D1917
: YA846C04B
Fuji Electric Co.,Ltd.
MS5D1917
Fuji Electric Co.,Ltd. Matsumoto Factory
1/12
H04-004-07
This material and the information herein is the property of Fuji Electric Co.,Ltd. They shall be neither reproduced, copied, lent, or disclosed in any way whatever for the use of any t h ird pa rt y n o r u s ed f o r th e m an uf a c tu rin g p u rp o se s wit h o u t the express written consent Fuji Electric Co.,Ltd.
SEP.-05 -2003 Date Classification Enactment Ind. ―
DWG.NO.
Fuji Electric Co.,Ltd.
Content ―――――― Issued date ――― Applied date Drawn Checked Approved
Revised Records
MS5D1917
2/12
H04-004-06
1. SCOPE This specification provides the ratings and the test requirement for FUJI SILICON DIODE YA846C04B 2. OUT VIEW, MARKING, MOLDING RESIN, CHARACTERISTICS (1)Out view is shown (2)Marking is shown (3)Molding resin Epoxy resin UL : V-0 (4)Characteristics is shown MS5D1917 10/12~12/12 3. RATINGS 3.1 MAXIMUM RATINGS (at Tc=25℃ unless otherwise specified.) ITEM SYMBOL CONDITIONS RATINGS Repetitive peak surge reverse voltage VRSM tw=500ns,duty=1/40 45 Repetitive peak reverse voltage VRRM 45 Square wave duty =1/2 Average output current Io 30* Tc= 98 ℃ Non-repetitive surge current ** IFSM Sine wave, 10ms 1shot 200 Operating junction temperature Tj 150 Storage temperature Tstg -40~+150 * Out put current of center tap full wave connection.
**
MS5D1917 MS5D1917
9/12 9/12
It is marked to type name or abbreviated type name, polarity and Lot No.
UNITS V V A A ℃ ℃
This material and the information herein is the property of Fuji Electric Co.,Ltd. They shall be neither reproduced, copied, lent, or disclosed in any way whatever for the use of any t h ird pa rt y n o r u s ed f o r th e m an uf a c tu rin g p u rp o se s wit h o u t the express written consent Fuji Electric Co.,Ltd.
Rating per element
UNITS V mA ℃/W
3.2 ELECTRICAL CHARACTERISTICS (at Tc=25℃ unless otherwise specified.) ITEM SYMBOL CONDITIONS MAXIMUM *** Forward voltage VF IF= 12.5A 0.55 Reverse current *** IR VR=VRRM 1.0 Thermal resistance Rth(j-c) Junction to case 2.0 *** Rating per element 3.3 MECHANICAL CHARACTERISTICS Mounting torque Approximate mass
Recommended torque 0.3~0.5 2.0
N・m g
Fuji Electric Co.,Ltd.
DWG.NO.
MS5D1917
3/12
H04-004-03
4. TEST AND INSPECTION 4.1 STANDARD TEST CONDITION Standard test condition is Ta=25℃、RH=65%. If judgment is no doubt, the test condition is possible to test in normal condition Ta=5~35℃、RH=48~85% 4.2 STRUCTURE INSPECTION It inspect with eye and measure,Item2 shall be satisfied. 4.3 FORWARD AND REVERSE CHARACTERISTICS It inspect on the standard condition,Item3.2 shall be satisfied. 4.4 TEST
Test No. Test Items Testing methods and Conditions Pull force : 10N Force maintaining duration :10±1s Load force : 5N Number of times : 2times(90deg./time) Screwing torque value:(M3) : 40±10N・cm Reference Standard EIAJ ED4701 A-111A method 1 A-111A method 3 A-112 method 2 Sampling number Acceptance number
This material and the information herein is the property of Fuji Electric Co.,Ltd. They shall be neither reproduced, copied, lent, or disclosed in any way whatever for the use of any t h ird pa rt y n o r u s ed f o r th e m an uf a c tu rin g p u rp o se s wit h o u t the express written consent Fuji Electric Co.,Ltd.
1 Terminal Strength (Tensile) 2 Terminal Strength (Bending) 3 Mounting Strength 4 Vibration Mechanical test
5
5 5
5 Shock
6 Solder ability
7 Resistance to Soldering Heat
Frequency : 100Hz to 2kHz Acceleration : 100m/s2 A-121 Sweeping time : 4min./1 cycle 4times for each X, Y&Z directions. Peak amplitude : 15km/s2 A-122 Duration time : 0.5ms test code D 3times for each X, Y&Z directions. Solder temp. : 235±5℃ Immersion time : 5±0.5s A-131A Each terminal shall be immersed in the test code A solder bath within 1to3.0mm from the body. Solder temp. : 260±5°C A-132 Immersion time : 10±1s Number of times : 1times
5 (0 : 1) 5
5
5
Fuji Electric Co.,Ltd.
DWG.NO.
MS5D1917
4/12
H04-004-03
Test No.
Test Items
Testing methods and Conditions Temperature :Tstg max Test duration : 1000h Temperature :Tstg min Test duration : 1000h Temperature : 85±2°C Relative humidity : 85±5% Test duration : 1000h Temperature : 85±2°C Relative humidity : 85±5% Bias Voltage : VRRM× 0.8 Test duration : 1000h Temperature : 130±2°C Relative humidity : 85±5% Vapor pressure : 230kPa Test duration : 48h High temp. side : Tstg max Room temp. : 5~35℃ Low temp. side .