INTELLIGENT POWER HIGH SIDE SWITCH
www.DataSheet4U.com
Data sheet No. PD60279
IPS6011(S)(R)PbF
INTELLIGENT POWER HIGH SIDE SWITCH
Features
• • • • • • • ...
Description
www.DataSheet4U.com
Data sheet No. PD60279
IPS6011(S)(R)PbF
INTELLIGENT POWER HIGH SIDE SWITCH
Features
Over temperature shutdown (with auto-restart) Short circuit protection (current limit) Reverse battery protection (turns On the MOSFET) Full diagnostic capability (short circuit to battery) Active clamp Open load detection in On and Off state Ground loss protection Logic ground isolated from power ground ESD protection
Product Summary Rds(on) Vclamp I Limit Open load Packages 14mΩ max. 39V 60A 3V / 2.4A
Description
The IPS6011(S)(R)PbF is a five terminal Intelligent Power Switch (IPS) for use in a high side configuration. It features short circuit, over-temperature, ESD protection, inductive load capability and diagnostic feedback. The output current is limited to the Ilim value. The current limitation is activated until the thermal protection acts. The overtemperature protection turns off the device if the junction temperature exceeds the Tshutdown value. It will automatically restart after the junction has cooled 7°C below the Tshutdown value. The reverse battery protection turns On the MOSFET. A diagnostic pin provides different voltage levels for each fault condition. The double level shifter circuitry will allow large offsets between the logic and load ground.
TO-220 IPS6011PbF
D²Pak D-Pak IPS6011SPbF IPS6011RPbF
Typical Connection
+5V
+Bat
Vcc(3) Dg(4)
Control
Rdgp
Rdgs
In(2)
V Diag
Rin
Pull-up resistors required for open load off and short...
Similar Datasheet