IR2237

www.DataSheet4U.com Data Sheet No. PD60170-G IR2137/IR2237(J)(Q) Features Floating channel up to +600V or +1200V “soft” over-current shutdown turns off all six outputs Integrated high side desaturation circuit Controlled “soft” turn on for EMI reduction Integrated brake IGBT driver Three independent low side COM pins Separate pull-up/pull-down output drive pins Matched delay outputs 3.3V logic compatible Under voltage lockout with hysteresis band 3-PHASE BRIDGE DRIVER Product Summary VOFFSET IO+/VOUT Brake Io+/Matched delay Deadtime (typ.) DESAT Blanking time (typ.) DESAT input voltage threshold (typ.) 600V max. or 1200V max. 220mA / 460mA 12.5V - 20V 40mA/80mA 75nsec 300 nsec 2.0usec Vt+ = 5.0V Description The IR2137/IR2237(J)(Q) are a high voltage, high speed 3-phase IGBT driver best suited for AC motor drive applications. Integrated desaturation logic provides ground fault protection as well as other mode of over current protection. Soft shutdown is initiated in the event of any overcurrent/ground fault conditions, and all six outputs are simultaneously turned off. Output drivers have separate turn on/off pins to facilitate independent gate drive impedance with EMI soft turn on. Optimum matched delays between phases, and between high/low side enables small deadtime, thus improving low speed performance. The brake driver eliminates additional circuits. Packages 64-Lead MQFP 68-Lead PLCC Typical Connection 15V 3 3 VCC LIN1,2,3 VB1,2,3 HOP1,2,3 ...