DatasheetsPDF.com

RINGING SLIC. AG1160 Datasheet

DatasheetsPDF.com

RINGING SLIC. AG1160 Datasheet






AG1160 SLIC. Datasheet pdf. Equivalent




AG1160 SLIC. Datasheet pdf. Equivalent





Part

AG1160

Description

RINGING SLIC



Feature


www.DataSheet4U.com V1.8 October 2006 D ata Sheet Silver TELECOM format. Ag11 60 5V RINGING SLIC FEATURES • A highl y featured SLIC in a 21 pin DIL • In tegral DC-DC converter. Single +5V supp ly voltage. TIP TI P RING RINGING SLIC +DC/DC VIN VOUT • Highly integrate d with on board ringing generator. • Tip/Ring polarity reversal, On-Hook Tra nsmission for caller line .
Manufacture

Silver

Datasheet
Download AG1160 Datasheet


Silver AG1160

AG1160; ID. Control and Supervision • “Sof t Shutdown” over current and thermal protection provides fail safe operation . • Easy to use, with a minimum numbe r of external components. • Simplifie d protection in “on-premise” applic ations. DESCRIPTION The Silver Telecom Ag1160 comprises a single Subscriber L ine Interface Circuit (SLIC) in a 21 pi n dual in line (DIL) format. The.


Silver AG1160

combination of features and packaging o ffers extremely efficient use of board area, saving significant system size an d cost, minimising time to market for T elephony Systems developers. The Ag1160 has been designed to work with loop le ngths of up to 3.0km (800R including te lephone). Its performance to regulatory standards allows use in public and pri vate network appli.


Silver AG1160

cations. The Ag1160 has integral dc/dc c onverter and ringing generation thus pr oviding all the line © Silver Telecom 2006 • Silver Telecom “design-in assistance. powering requirements fro m a single supply. The SLIC requires a minimum of external components. The sys tem interface has been designed for con nection to all popular codecs of both t he audio and signalling c.

Part

AG1160

Description

RINGING SLIC



Feature


www.DataSheet4U.com V1.8 October 2006 D ata Sheet Silver TELECOM format. Ag11 60 5V RINGING SLIC FEATURES • A highl y featured SLIC in a 21 pin DIL • In tegral DC-DC converter. Single +5V supp ly voltage. TIP TI P RING RINGING SLIC +DC/DC VIN VOUT • Highly integrate d with on board ringing generator. • Tip/Ring polarity reversal, On-Hook Tra nsmission for caller line .
Manufacture

Silver

Datasheet
Download AG1160 Datasheet




 AG1160
www.DataSheet4U.com
Silver
V1.8 October 2006
Data Sheet
Ag1160
TELECOM
5V RINGING SLIC
FEATURES
A highly featured SLIC in a 21 pin DIL
format.
• Integral DC-DC converter. Single +5V
supply voltage.
TIP
RING
RINGING
SLIC
+DC/DC
VIN
• Highly integrated with on board ringing
VOUT generator.
Control and
Supervision
• Tip/Ring polarity reversal, On-Hook
Transmission for caller line ID.
• “Soft Shutdown” over current and
thermal protection provides fail safe
operation.
• Easy to use, with a minimum number of
external components.
• Simplified protection in “on-premise”
applications.
DESCRIPTION
• Silver Telecom “design-in” assistance.
The Silver Telecom Ag1160 comprises a
single Subscriber Line Interface Circuit (SLIC)
in a 21 pin dual in line (DIL) format. The
combination of features and packaging offers
extremely efficient use of board area, saving
significant system size and cost, minimising
time to market for Telephony Systems
developers.
powering requirements from a single supply.
The SLIC requires a minimum of external
components.
The system interface has been designed for
connection to all popular codecs of both the
audio and signalling connections.
The Ag1160 has been designed to work with
loop lengths of up to 3.0km (800R including
telephone). Its performance to regulatory
standards allows use in public and private
network applications.
The Ag1160 has integral dc/dc converter and
ringing generation thus providing all the line
The Ag1160 is ideal for low line count, short
loop length applications, such as ISDN
Terminal Adaptors, Internet Telephony (VoIP),
Computer Telephony Integration (CTI), Digital
Loop Carriers (DLC), Wireless Local Loops
(WLL) and Small Office Home Office
(SOHO).
© Silver Telecom 2006




 AG1160
V1.8 October 2006
Data Sheet
Ag1160
5V RINGING SLIC
Silver
TEL ECOM
Figure 1: Packaging Format
Ordering Information
Ag1160
5V Ringing SLIC, standard device
Ag1160A 5V Ringing SLIC, low power
Ag1160-48 5V Ringing SLIC, 48V line voltage
Ag1160A-48 5V Ringing SLIC, 48V line voltage, low power
Ag1160
5V RINGING SLIC
Tip
Ring
2-4 Wire
Converter
and Line
Int erf ace
Line
Reversal and
Ringing Cont rol
Superv ision
Power Mana gem ent a nd
DC- DC converter
GNDA
+ 5VA
CAP
RM
F/R
LO
SHK
VOUT
VIN
+5VPWR GNDPWR
PD
Figure 2: Functional Block Diagram
© Silver Telecom 2006
Page 2




 AG1160
V1.8 October 2006
Data Sheet
Ag1160
5V RINGING SLIC
Pin Description
Pin #
Name
Description
1 TIP (A) Tip. Connects to the subscriber line Tip.
2 RING (B) Ring. Connects to the subscriber line Ring.
3
NC
No Connection. This pin is not connected internally to the
device.
4
PD
Power Down. A logic 1 powers off the DC-DC converter.
Connect to logic 0 for normal operation.
5
NC
No Connection. This pin is not connected internally to the
device.
6
LO
Loop Off. A logic 1 removes the loop current from the line.
Connect to logic 0 for normal operation.
7
RM
Ringing Mode. Sets bias conditions during ringing. Must be set
to logic 1 during ringing.
8 GNDA Analog Ground. Normally connected to system ground.
9
+5VA
Analog Supply. This pin must be connected to the +5V supply
via an RC filter, to supply power to the analog circuits.
10
NC
No Connection. This pin is not connected internally to the
device.
11
NC
No Connection. This pin is not connected internally to the
device.
12
NC
No Connection. This pin is not connected internally to the
device.
13
VIN
Audio In. This is the analog input signal from the Codec (which is
output on Tip and Ring). Connected via a 100nF capacitor.
Slew Rate Capacitor. A capacitor is fitted between this pin and
14 CAP GND to control the battery reversal and the ringing slew rate.
220nF is recommended.
15
VOUT
Audio Out. This is the analog output signal (from Tip and Ring)
to the Codec. Connected via a 100nF capacitor.
16
F/R
Forward/Reverse. A logic 0 will reverse the Tip and Ring voltage
polarities. F/R is toggled to produce the ringing output.
17 SHK Switch Hook. Indicates an off-hook condition when at logic 1.
18 GNDPWR DC-DC Ground. Internal ground for the DC-DC converter.
19 VPWR DC-DC Supply. +5V input for the DC-DC converter.
20 GNDPWR DC-DC Ground. Internal ground for the DC-DC converter.
21 VPWR DC-DC Supply. +5V input for the DC-DC converter.
© Silver Telecom 2006
Page 3






Recommended third-party AG1160 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)