Document
www.DataSheet4U.com
Bulletin I27129 rev. C 05/03
200MT40KB
THREE PHASE BRIDGE Features
Package fully compatible with the industry standard INT-Apak power modules series High thermal conductivity package, electrically insulated case Low power loss Excellent power volume ratio, outline for easy connections to power transistor and IGBT modules 4000 VRMS isolating voltage UL E78996 approved
Power Module
200 A
Description
It extents the existing range of MT...KB bridges an extremely compact, encapsulated three phase bridge rectifiers offering efficient and reliable operation. They are intended for use in general purpose and heavy duty applications.
Major Ratings and Characteristics
Parameters
IO @ TC IFSM @ 50Hz @ 60Hz I t
2
200MT40KB
200 85 1800 1880 16.2 14.7 162 400 - 40 to 150 - 40 to 150
Units
A °C A
@ 50Hz @ 60Hz
KA2s
I2√t VRRM TSTG range TJ range
KA2√s V °C
www.irf.com
1
200MT40KB
Bulletin I27129 rev. C 05/03
ELECTRICAL SPECIFICATIONS Voltage Ratings
VRRM, maximum Type number repetitive peak reverse voltage V
400
VRSM, maximum non-repetitive peak reverse voltage V
500
IRRM max.
@ TJ = 150°C
mA
6
200MT40KB
Forward Conduction
Parameter
IO ITSM Maximum RMS output current @ Case temperature Maximum peak, one-cycle forward, non-repetitive on state surge current I2t Maximum I2 t for fusing
200MT40KB
200 85 1800 1880 1520 1590 16.2 14.7 11.6 12.6
Units Conditions
A °C A 120° Rect conduction angle t = 10ms t = 8.3ms t = 10ms t = 8.3ms KA2s t = 10ms t = 8.3ms t = 10ms t = 8.3ms No voltage reapplied 100% VRRM reapplied No voltage reapplied 100% VRRM reapplied Initial TJ = TJ max.
I2√t
Maximum I2√t for fusing
162 0.76 2.4 1.40 4000
KA2√s t = 0.1 to 10ms, no voltage reapplied V mΩ V V Ipk = 200A, TJ = 25°C, tp = 400µs single junction TJ = 25oC all terminal shorted, f = 50Hz, t = 1s @ TJ max.
VF(TO) Value of threshold voltage rt VFM VINS Slope resistance Maximum forward voltage drop Insulation voltage
Thermal and Mechanical Specifications
Parameter
TJ Maximum junction operating temperature range Tstg RthJC Maximum storage temperature range Maximum thermal resistance, junction to case 0.12 0.69 0.14 0.82 RthCS Maximum thermal resistance, case to heatsink T Mounting torque ± 10% to heatsink wt Approximate weight 176 g 4 to 6 Nm 0.033 K/W K/W DC operation per module DC operation per junction 120° Rect condunction angle per module 120° Rect condunction angle per junction
Per module. Mounting surface smooth, flat and greased. Heatsink compound thermal conductivity = 0.42W/mK A mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. Lubricated threads.
200MT40KB
- 40 to 150
Units Conditions
°C
-40 to 150
°C
2
www.irf.com
200MT40KB
Bulletin I27129 rev. C 05/03
Ordering Information Table
Device Code
20
0
MT
40
K
B
1
2
3
4
5
1 2 3 4 5
-
Current rating code: 20 = 200 A (Avg) Three phase diodes bridge Essential part number Voltage code: Code x 10 = VRRM (40 = 400V) Generation II
Outline Table (without optional barriers)
D A B C E F
All dimensions in millimeters (inches)
NOTE: To order the Optional Hardware see Bulletin I27900
www.irf.com
3
200MT40KB
Bulletin I27129 rev. C 05/03
Outline Table (with optional barriers)
D A B C E F
All dimensions in millimeters (inches)
Maximum Allowable Case Temperature (°C)
140 130 120 110 100 90 80 70 60 80 100 120 140 160 180 200 220
Total Output Current (A) Fig. 1 - Current Rating Characteristics
Instantaneous On-state Current (A)
1000
120˚ (Rect)
100
Tj = 25˚C
10
Tj = 150˚C
1 0.5
1
1.5
2
2.5
3
Instantaneous On-state Voltage (V) Fig. 2 - On-state Voltage Drop Characteristics
4
www.irf.com
200MT40KB
Bulletin I27129 rev. C 05/03
Peak Half Sine Wave On-state Current (A)
Peak Half Sine Wave On-state Current (A)
1600 1400 1200 1000 800 600
At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 150˚C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s
2000 1800
Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. 1600 Initial T j = 150˚C No Voltage Reapplied 1400 Rated V rrm Reapplied
1200 1000 800 600 400 200
Per Junction
Per Junction
400 1 10 100
Number Of Equal Amplitude Half Cycle Current Pulses (N)
0 0.01
0.1
1
10
Pulse Train Duration(s) Fig. 4 - Maximum Non-Repetitive Surge Current
Fig. 3 - Maximum Non-Repetitive Surge Current
500
5 02 0. = A hS Rt W K/
Maximum Total Power Loss (W)
0. 1
05 0.
K/ W
400 300 200 100 0 0 40 80 120 160
0 200
120˚ (Rect)
W K/
0.2 K/ W 0.3 K/W
0.5 K/W
1 K/W
a elt -D R
Tj = 125˚C
30
60
90
120
150
Total Output Current (A)
Maximum Allowable Ambient Temperature ( ° C)
Fig. 5 - Current Rating Nomogram (1 Module Per Heatsink)
Transient Thermal Impedance Z thJC (K/W)
10
Steady State Value RthJC per junction = 0.69 K/W DC Operation)
1
0.1
0.01 0.0001
0.001
0.01
0.1
1
10
Square Wave Pulse Duration (s) Fig. 6 - .