SST13LP01

www.DataSheet4U.com 2.4-2.5 GHz / 4.9-5.8 GHz Dual-Band Power Amplifier SST13LP01 SST13LP012.4 GHz / 5 GHz Dual-Band Power Amplifier Preliminary Specifications FEATURES: High Gain: – Typically 28 dB gain across 2.4-2.5 GHz over temperature 0°C to +85°C – Typically 30-33 dB gain across 4.9-5.8 GHz over temperature 0°C to +85°C High linear output power: – >29 dBm P1dB across 2.4-2.5 GHz (Exceeding maximum rating of average output power, never measure with CW source! Pulsed single-tone source with <50% duty cycle is recommended.) – Meets 802.11g OFDM ACPR requirement up to 23 dBm – Added EVM~4% up to 21 dBm for 54 Mbps 802.11g signal – Meets 802.11b ACPR requirement up to 23 dBm – ~28 dBm P1dB (Pulsed single-tone signal) across 4.9~5.8 GHz – Meets 802.11a OFDM ACPR requirement up to 22 dBm over whole band – Added EVM~4% up to 20 dBm for 54 Mbps 802.11a signal High power-added efficiency/Low operating current for both 802.11a/b/g applications – ~24%/250 mA @ POUT = 23 dBm for 802.11g – ~23%/260 mA @ POUT = 23 dBm for 802.11b – ~9.5%/320 mA @ POUT = 20 dBm for 802.11a Built-in Ultra-low IREF power-up/down control – IREF <3 mA Low idle current – ~70 mA ICQ (802.11b/g) – ~170 mA ICQ (802.11a) High-speed power-up/down – Turn on/off time (10%~90%) <100 ns – Typical power-up/down delay with driver delay included <200 ns High temperature stability – ~1 dB gain/power variation between 0°C to +85°C across 2.4~2.5 GHz – ~3.5/1.5 dB gain/max linear power variation between 0...