STLVDS051

STLVDS051 High speed differential line drivers and receivers Feature summary I Meets or exceed the requirements of ansi eia/tia-644-1995 standard I Signaling rates up to 400Mbit/s ) I Bus terminal ESD exceeds 6kV t(s I Operates from a single 3.3V supply uc I Low-voltage differential signaling with typical d output voltage of 350mV and a 100Ω load ro ) I Propagation delay times: P t(s Driver: 2ns (typ) te c Receiver: 3ns (typ) le du I Power dissipation at 200MHz: so ro Driver: 25mW (typ) Receiver: 60mW (typ) - Ob te P I LVTTL input levels are 5V tolerant ) le I Receiver has open-circuit fail-safe t(s so Description uc Ob The STLVDS051 is differential line drivers and d - receivers that use low-voltage differential ro ) signaling (LVDS) to achieve signaling rate as high P t(s as 400Mbps. lete uc The EIA/TIA-644 standard compliant electrical d interface provides a minimum differential output so ro voltage magnitude of 247mV into a 100Ω load b P and receipt of 100mV signals with up to 1V of ground potential difference between a transmitter OObsolete and receiver. TSSOP The intended application of this device an signaling technique is for point-to-point baseband data transmission over controlled impedance media of approximately 100Ω characteristic impedance. The transmission media may be printed-circuit board traces, backplanes, or cables. (Note: The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media, the noise coupling ...