DatasheetsPDF.com

SIE810DF Dataheets PDF



Part Number SIE810DF
Manufacturers Vishay Siliconix
Logo Vishay Siliconix
Description N-Channel 20-V (D-S) MOSFET
Datasheet SIE810DF DatasheetSIE810DF Datasheet (PDF)

SPICE Device Model SiE810DF Vishay Siliconix N-Channel 20-V (D-S) MOSFET CHARACTERISTICS • N-Channel Vertical DMOS • Macro Model (Subcircuit Model) • Level 3 MOS • Apply for both Linear and Switching Application • Accurate over the −55 to 125°C Temperature Range • Model the Gate Charge, Transient, and Diode Reverse Recovery Characteristics DESCRIPTION The attached spice model describes the typical electrical characteristics of the n-channel vertical DMOS. The subcircuit model is extracted and o.

  SIE810DF   SIE810DF


Document
SPICE Device Model SiE810DF Vishay Siliconix N-Channel 20-V (D-S) MOSFET CHARACTERISTICS • N-Channel Vertical DMOS • Macro Model (Subcircuit Model) • Level 3 MOS • Apply for both Linear and Switching Application • Accurate over the −55 to 125°C Temperature Range • Model the Gate Charge, Transient, and Diode Reverse Recovery Characteristics DESCRIPTION The attached spice model describes the typical electrical characteristics of the n-channel vertical DMOS. The subcircuit model is extracted and optimized over the −55 to 125°C temperature ranges under the pulsed 0-V to 4.5-V gate drive. The saturated output impedance is best fit at the gate bias near the threshold voltage. A novel gate-to-drain feedback capacitance network is used to model the gate charge characteristics while avoiding convergence difficulties of the switched Cgd model. All model parameter values are optimized to provide a best fit to the measured electrical data and are not intended as an exact physical interpretation of the device. SUBCIRCUIT MODEL SCHEMATIC This document is intended as a SPICE modeling guideline and does not constitute a commercial product data sheet. Designers should refer to the appropriate data sheet of the same number for guaranteed specification limits. Document Number: 74188 S-60992Rev. A, 12-Jun-06 www.vishay.com 1 SPICE Device Model SiE810DF Vishay Siliconix SPECIFICATIONS (TJ = 25°C UNLESS OTHERWISE NOTED) Parameter Static Gate Threshold Voltage On-State Drain Current a Symbol Test Condition Simulated Data 1.1 1490 0.0013 0.0021 202 0.84 Measured Data Unit VGS(th) ID(on) rDS(on) gfs VSD VDS = VGS, ID = 250 µA VDS ≤ 5 V, VGS = 4.5 V VGS = 4.5 V, ID = 25 A VGS = 2.5 V, ID = 25 A VDS = 10 V, ID = 25 A IS = 10 A V A 0.0013 0.0022 163 0.90 Ω S V Drain-Source On-State Resistancea Forward Transconductancea Forward Voltagea Dynamicb Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge Gate-Source Charge Gate-Drain Charge Ciss Coss Crss Qg Qgs Qgd VDS = 10V, VGS = 10 V, ID = 20 A VDS = 10 V, VGS = 0 V, f = 1 MHz 13430 1774 803 190 91 VDS = 10 V, VGS = 4.5 V, ID = 20 A 21 19 13000 1600 1000 200 90 21 19 nC pF Notes a. Pulse test; pulse width ≤ 300 µs, duty cycle ≤ 2%. b. Guaranteed by design, not subject to production testing. www.vishay.com 2 Document Number: 74188 S-60992Rev. A, 12-Jun-06 SPICE Device Model SiE810DF Vishay Siliconix COMPARISON OF MODEL WITH MEASURED DATA (TJ=25°C UNLESS OTHERWISE NOTED) Document Number: 74188 S-60992Rev. A, 12-Jun-06 www.vishay.com 3 .


SCL4028B SIE810DF SP809


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)