CS8156

www.DataSheet4U.com CS8156 12 V, 5.0 V Low Dropout Dual Regulator with ENABLE The CS8156 is a low dropout 12 V/5.0 V dual output linear regulator. The 12 V ±5.0% output sources 750 mA and the 5.0 V ±2.0% output sources 100 mA. The on board ENABLE function controls the regulator’s two outputs. When the ENABLE lead is low, the regulator is placed in SLEEP mode. Both outputs are disabled and the regulator draws only 200 nA of quiescent current. The regulator is protected against overvoltage conditions. Both outputs are protected against short circuit and thermal runaway conditions. The CS8156 is packaged in a 5 lead TO−220 with copper tab. The copper tab can be connected to a heat sink if necessary. Features http://onsemi.com TO−220 FIVE LEAD T SUFFIX CASE 314D 1 5 TO−220 FIVE LEAD TVA SUFFIX CASE 314K Two Regulated Outputs − 12 V ±5.0%; 750 mA − 5.0 V ±2.0%; 100 mA Very Low SLEEP Mode Current Drain 200 nA Fault Protection − Reverse Battery − +60 V, −50 V Peak Transient Voltage − Short Circuit − Thermal Shutdown CMOS Compatible ENABLE Pb−Free Packages are Available 1 1 TO−220 FIVE LEAD THA SUFFIX CASE 314A 5 PIN CONNECTIONS AND MARKING DIAGRAM CS 8156 AWLYWWG Tab = GND Pin 1. VIN 2. VOUT1 3. GND 4. ENABLE 5. VOUT2 1 CS8156 A WL Y WW G = Specific Device Code = Assembly Location = Wafer Lot = Year = Work Week = Pb−Free Package ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 9 of this data sheet. *F...