www.DataSheet4U.com
CS52015−1 1.5 A Adjustable Linear Regulator
The CS52015−1 linear regulator provides 1.5 A with an a...
www.DataSheet4U.com
CS52015−1 1.5 A Adjustable Linear
Regulator
The CS52015−1 linear
regulator provides 1.5 A with an accuracy of ±1.0%. The device uses two external resistors to set the output voltage within a 1.25 V to 5.5 V range. The
regulator is intended for use as a post
regulator and microprocessor supply. The fast loop response and low dropout voltage make this
regulator ideal for applications where low voltage operation and good transient response are important. The circuit is designed to operate with dropout voltages less than 1.4 V at 1.5 A output current. Device protection includes overcurrent and thermal shutdown. The CS52015−1 is pin compatible with the LT1086 family of linear
regulators but has lower dropout voltage. The
regulator is available in TO−220−3, surface mount D2PAK−3, and SOT−223 packages. Features Output Current to 1.5 A Output Accuracy to ±1.0% Over Temperature Dropout Voltage (typical) 1.05 V @ 1.5 A Fast Transient Response Fault Protection − Current Limit − Thermal Shutdown
5.0 V VIN VOUT
http://onsemi.com
TO−220−3 T SUFFIX CASE 221A 1
2
3 D2PAK−3 DP SUFFIX CASE 418AB
Tab = VOUT Pin 1. Adj 2. VOUT 3. VIN
12
3 SOT−223 ST SUFFIX CASE 318E
1
23
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 7 of this data sheet.
CS52015−1 Adj 124 W 1.0%
3.3 V @ 1.5 A
DEVICE MARKING INFORMATION
See general marking information in the device marking section on page 7 of this data she...