Document
EL5102, EL5103, EL5202, EL5203, EL5302
®
Data Sheet
January 17, 2008
FN7331.8
400MHz Slew Enhanced VFAs
The EL5x02 and EL5x03 families represent high-speed VFAs based on a CFA amplifier architecture. This gives the typical high slew rate benefits of a CFA family along with the stability and ease of use associated with the VFA type architecture. With slew rates of 3500V/µs, this family of devices enables the use of voltage feedback amplifiers in a space where the only alternative has been current feedback amplifiers. This family will also be available in single, dual, and triple versions, with 200MHz, 400MHz, and 750MHz versions. These are all available in single, dual, and triple versions.
Both families operate on single 5V or ±5V supplies from minimum supply current. EL5x02 also features an output enable function, which can be used to put the output in to a high-impedance mode. This enables the outputs of multiple amplifiers to be tied together for use in multiplexing applications.
Typical applications for these families will include cable driving, filtering, A/D and D/A buffering, multiplexing and summing within video, communications, and instrumentation designs.
Features
• Operates off 3V, 5V, or ±5V applications • Power-down to 0µA (EL5x02) • -3dB bandwidth = 400MHz • ±0.1dB bandwidth = 50MHz • Low supply current = 5mA • Slew rate = 3500V/µs • Low offset voltage = 5mV max • Output current = 140mA • AVOL = 2000 • Differential gain/phase = 0.01%/0.01° • Pb-free available (RoHS compliant)
Applications
• Video amplifiers • PCMCIA applications • A/D drivers • Line drivers • Portable computers • High speed communications • RGB applications • Broadcast equipment • Active filtering
1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2002-2007, 2008. All Rights Reserved All other trademarks mentioned are the property of their respective owners.
EL5102, EL5103, EL5202, EL5203, EL5302
Ordering Information
PART NUMBER
PART MARKING
PACKAGE
PKG. DWG. #
EL5102IS
5102IS
8 Ld SOIC (150 mil)
MDP0027
EL5102IS-T7*
5102IS
8 Ld SOIC (150 mil)
MDP0027
EL5102IS-T13*
5102IS
8 Ld SOIC (150 mil)
MDP0027
EL5102ISZ (Note)
5102ISZ
8 Ld SOIC (150 mil) (Pb-free)
MDP0027
EL5102ISZ-T7* (Note)
5102ISZ
8 Ld SOIC (150 mil) (Pb-free)
MDP0027
EL5102ISZ-T13* (Note)
5102ISZ
8 Ld SOIC (150 mil) (Pb-free)
MDP0027
EL5102IW-T7* q 6 Ld SOT-23
MDP0038
EL5102IW-T7A*
q
6 Ld SOT-23
MDP0038
EL5102IWZ-T7* (Note)
BBSA
6 Ld SOT-23 (Pb-free)
MDP0038
EL5102IWZ-T7A* (Note)
BBSA
6 Ld SOT-23 (Pb-free)
MDP0038
EL5103IC
B 5 Ld SC-70
P5.049
EL5103IC-T7*
B 5 Ld SC-70
P5.049
EL5103IC-T7A*
B
5 Ld SC-70
P5.049
EL5103IW-T7* g 5 Ld SOT-23
MDP0038
EL5103IW-T7A*
g
5 Ld SOT-23
MDP0038
EL5103IWZ-T7*
BBTA
5 Ld SOT-23 (Pb-free)
MDP0038
EL5103IWZ-T7A*
BBTA
5 Ld SOT-23 (Pb-free)
MDP0038
EL5202IY
BRAAA
10 Ld MSOP (3.0mm)
MDP0043
EL5202IY-T7*
BRAAA
10 Ld MSOP (3.0mm)
MDP0043
EL5202IY-T13*
BRAAA
10 Ld MSOP (3.0mm)
MDP0043
EL5202IYZ (Note)
BAAAD
10 Ld MSOP (3.0mm) (Pb-free)
MDP0043
EL5202IYZ-T7* (Note)
BAAAD
10 Ld MSOP (3.0mm) (Pb-free)
MDP0043
EL5202IYZ-T13* (Note)
BAAAD
10 Ld MSOP (3.0mm) (Pb-free)
MDP0043
EL5203IS
5203IS
8 Ld SOIC (150 mil)
MDP0027
EL5203IS-T7*
5203IS
8 Ld SOIC (150 mil)
MDP0027
EL5203IS-T13*
5203IS
8 Ld SOIC (150 mil)
MDP0027
EL5203ISZ (Note)
5203ISZ
8 Ld SOIC (150 mil) (Pb-free)
MDP0027
EL5203ISZ-T7* (Note)
5203ISZ
8 Ld SOIC (150 mil) (Pb-free)
MDP0027
EL5203ISZ-T13* (Note)
5203ISZ
8 Ld SOIC (150 mil) (Pb-free)
MDP0027
EL5203IY
BSAAA
8 Ld MSOP (3.0mm)
MDP0043
EL5203IY-T7*
BSAAA
8 Ld MSOP (3.0mm)
MDP0043
EL5203IY-T13*
BSAAA
8 Ld MSOP (3.0mm)
MDP0043
EL5203IYZ (Note)
BAAAE
8 Ld MSOP (3.0mm) (Pb-free)
MDP0043
EL5203IYZ-T7* (Note)
BAAAE
8 Ld MSOP (3.0mm) (Pb-free)
MDP0043
EL5203IYZ-T13* (Note)
BAAAE
8 Ld MSOP (3.0mm) (Pb-free)
MDP0043
EL5302IU
5302IU
16 Ld QSOP (150 mil)
MDP0040
EL5302IU-T7*
5302IU
16 Ld QSOP (150 mil)
MDP0040
EL5302IU-T13*
5302IU
16 Ld QSOP (150 mil)
MDP0040
EL5302IUZ (Note)
5302IUZ
16 Ld QSOP (150 mil) (Pb-free)
MDP0040
EL5302IUZ-T7* (Note)
5302IUZ
16 Ld QSOP (150 mil) (Pb-free)
MDP0040
EL5302IUZ-T13* (Note)
5302IUZ
16 Ld QSOP (150 mil) (Pb-free)
MDP0040
* Please refer to TB347 for details on reel specifications. NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate PLUS ANNEAL - e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
2.