DatasheetsPDF.com

IRS21303 Dataheets PDF



Part Number IRS21303
Manufacturers International Rectifier
Logo International Rectifier
Description (IRS2130 - IRS2132) 3-PHASE BRIDGE DRIVER
Datasheet IRS21303 DatasheetIRS21303 Datasheet (PDF)

www.DataSheet4U.com PRELIMINARY Data Sheet No. PD60274 revA IRS2130/IRS21303/IRS2132 (J&S)PbF 3-PHASE BRIDGE DRIVER Features • • • • • • • • • • • • Floating channel designed for bootstrap operation Fully operational to +600 V Tolerant to negative transient voltage, dV/dt immune Gate drive supply range from 10 V to 20 V Undervoltage lockout for all channels Over-current shutdown turns off all six drivers Three Independent half-bridge drivers Matched propagation delay for all channels 2.5 V lo.

  IRS21303   IRS21303


Document
www.DataSheet4U.com PRELIMINARY Data Sheet No. PD60274 revA IRS2130/IRS21303/IRS2132 (J&S)PbF 3-PHASE BRIDGE DRIVER Features • • • • • • • • • • • • Floating channel designed for bootstrap operation Fully operational to +600 V Tolerant to negative transient voltage, dV/dt immune Gate drive supply range from 10 V to 20 V Undervoltage lockout for all channels Over-current shutdown turns off all six drivers Three Independent half-bridge drivers Matched propagation delay for all channels 2.5 V logic compatible Outputs out of phase with inputs Cross-conduction prevention logic All parts are LEAD-FREE Product Summary VOFFSET IO+/- (min.) VOUT ton/off (typ.) Deadtime (typ.) 600 V max. 200 mA / 420 mA 10 V – 20 V (IRS213(0,2)) 13 V – 20 V (IRS21303) 500 ns 2.0 µs (IRS2130) 0.7 µs (IRS213(2,03)) Applications: *Motor Control *Air Conditioners/ Washing Machines *General Purpose Inverters *Micro/Mini Inverter Drives Description Packages The IRS213(0, 03, 2) are high voltage, high speed power MOSFET and IGBT drivers with three independent high and low side referenced output channels. Proprietary HVIC technology enables ruggedized monolithic construction. Logic inputs are compatible with CMOS or LSTTL outputs, down to 2.5 V logic. A ground-referenced operational amplifier provides analog feedback of bridge 28-Lead SOIC 28-Lead PDIP current via an external current sense resistor. A current trip function which terminates all six outputs is also derived from this resistor. An open drain FAULT signal indicates if an over-current or undervoltage shutdown has occurred. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use at high frequencies. The 44-Lead PLCC w/o 12 Leads floating channels can be used to drive N-channel power MOSFETs or IGBTs in the high side configuration which operates up to 600 V. Typical Connection www.irf.com 1 IRS2130/IRS21303/IRS2132 (J&S)PbF PRELIMINARY Absolute Maximum Ratings Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to VSO. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Zener clamps are included between VCC & VSO (25 V), VCC & VSS (20V), and VBx & VSx (20 V). Symbol VB1,2,3 VS1,2,3 VHO1,2,3 VCC VSS VLO1,2,3 VIN VFLT VCAO VCAdVS/dt PD Definition High side floating supply voltage High side floating offset voltage High side floating output voltage Low side and logic fixed supply voltage Logic ground Low side output voltage Logic input voltage ( HIN1,2,3, LIN1,2,3 & ITRIP) FAULT output voltage Operational amplifier output voltage Operational amplifier inverting input voltage Allowable offset supply voltage transient (28 lead PDIP) Package power dissipation @ TA ≤ +25 °C (28 lead SOIC) (44 lead PLCC) (28 lead PDIP) Min. -0.3 VB1,2,3 - 20 VS1,2,3 - 0.3 -0.3 VCC - 20 -0.3 VSS -0.3 VSS -0.3 VSS -0.3 VSS -0.3 — — — — — — — — -55 — Max. 625 VB1,2,3 + 0.3 VB1,2,3 + 0.3 25 VCC + 0.3 VCC + 0.3 (VSS + 15) or (VCC + 0.3), whichever is lower VCC +0.3 VCC +0.3 VCC +0.3 50 1.5 1.6 2.0 83 78 63 150 150 300 Units V V/ns W Rth,JA TJ TS TL Thermal resistance, junction to ambient Junction temperature Storage temperature Lead temperature (soldering, 10 seconds) (28 lead SOIC) (44 lead PLCC) °C/W °C www.irf.com 2 IRS2130/IRS21303/IRS2132 (J&S)PbF PRELIMINARY Recommended Operating Conditions The input/output logic timing diagram is shown in Fig. 1. For proper operation, the device should be used within the recommended conditions. All voltage parameters are absolute voltage referenced to VSO. The VS offset rating is tested with all supplies biased at a 15 V differential. Symbol VB1,2,3 VS1,2,3 VHO1,2,3 VCC VSS VLO1,2,3 VIN VFLT VCAO VCATA Definition High side floating supply voltage High side floating offset voltage High side floating output voltage Low side and logic fixed supply voltage Logic ground Low side output voltage Logic input voltage (HIN1,2,3, LIN1,2,3 & ITRIP) FAULT output voltage Operational amplifier output voltage Operational amplifier inverting input voltage Ambient temperature IRS213(0,2) IRS21303 IRS213(0,2) IRS21303 Min. VS1,2,3 +10 VS1,2,3 +13 Note 1 VS1,2,3 10 13 -5 0 VSS VSS VSS VSS -40 Max. VS1,2,3 +20 600 VB1,2,3 20 5 VCC VSS + 5 VCC VSS + 5 VSS + 5 125 Units V °C Note 1: Logic operational for VS of (VSO - 8 V) to (VSO + 600 V). Logic state held for VS of (VSO - 8 V) to (VSO – VBS). (Please refer to the Design Tip DT97-3 for more details). Note 2: The CAO pin and all input pins (except CA-) are internally clamped with a 5.2 V zener diode. www.irf.com 3 IRS2130/IRS21303/IRS2132 (J&S)PbF PRELIMINARY Static Electrical Characteristics VBIAS (VCC, VBS1,2,3) = 15 V, VSO1,2,3 = VSS and TA = 25 °C unless otherwise specified. The VIN, VTH, and IIN parameters are referenced to VSS and are applicable t.


IRS2130 IRS21303 IRS2132


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)