MC74HC175

www.DataSheet4U.com MOTOROLA SEMICONDUCTOR TECHNICAL DATA Quad D Flip-Flop with Common Clock and Reset High–Performance Silicon–Gate CMOS The MC54/74HC175 is identical in pinout to the LS175. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LSTTL outputs. This device consists of four D flip–flops with common Reset and Clock inputs, and separate D inputs. Reset (active–low) is asynchronous and occurs when a low level is applied to the Reset input. Information at a D input is transferred to the corresponding Q output on the next positive going edge of the Clock input. Output Drive Capability: 10 LSTTL Loads Outputs Directly Interface to CMOS, NMOS, and TTL Operating Voltage Range: 2 to 6 V Low Input Current: 1 µA High Noise Immunity Characteristic of CMOS Devices In Compliance with the Requirements Defined by JEDEC Standard No. 7A Chip Complexity 166 FETs or 41.5 Equivalent Gates MC54/74HC175 16 1 J SUFFIX CERAMIC PACKAGE CASE 620–10 16 1 N SUFFIX PLASTIC PACKAGE CASE 648–08 16 1 D SUFFIX SOIC PACKAGE CASE 751B–05 ORDERING INFORMATION MC54HCXXXJ MC74HCXXXN MC74HCXXXD Ceramic Plastic SOIC LOGIC DIAGRAM CLOCK 9 2 3 7 6 10 11 15 14 1 PIN 16 = VCC PIN 8 = GND Q0 Q0 Q1 Q1 Q2 Q2 Q3 Q3 PIN ASSIGNMENT INVERTING AND NONINVERTING OUTPUTS RESET Q0 Q0 D0 D1 Q1 Q1 GND 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC Q3 Q3 D3 D2 Q2 Q2 CLOCK D0 DATA INPUTS D1 4 5 D2 12 D3 13 RESET FUNCTION TABLE Inputs Reset ...