Document
UNISONIC TECHNOLOGIES CO., LTD
X1049A
NPN SILICON TRANSISTOR
HIGH GAIN TRANSISTOR
FEATURES
* VCEV = 80V * High Gain * 20 Amps pulse current
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
X1049AL-TF3-T
X1049AG-TF3-T
X1049AL-TF2-T
X1049AG-TF2-T
X1049AL-T92-B
X1049AG-T92-B
X1049AL-T92-K
X1049AG-T92-K
Note: Pin Assignment: B: Base C: Collector E: Emitter
Package
TO-220F TO-220F2
TO-92 TO-92
Pin Assignment 123 BCE BCE EBC EBC
Packing
Tube Tube Tape Box Bulk
X1049AG-TF3-T
(1)Packing Type (2)Package Type (3)Green Package
(1) T: Tube, B: Tape Box, K: Bulk (2) TF3: TO-220F, TF2: TO-220F2, T92: TO-92
(3) G: Halogen Free and Lead Free, L: Lead Free
MARKING
TO-220F / TO-220F2
TO-92
www.unisonic.com.tw Copyright © 2018 Unisonic Technologies Co., Ltd
1 of 4
QW-R201-061.F
X1049A
NPN SILICON TRANSISTOR
ABSOLUTE MAXIMUM RATING (TA=25°C, unless otherwise specified)
PARAMETER
SYMBOL
RATINGS
UNIT
Collector-Base Voltage
VCBO
80
V
Collector-Emitter Voltage Emitter-Base Voltage
VCEO VEBO
25 5
V V
Collector Current
DC Pulse
IC
4A 20 A
Base Current
TO-220F
IB
500 mA 2
Power Dissipation (TA=25°C)
TO-220F2
PD
2.1 W
TO-92
1
Junction Temperature Operating Temperature
TJ TOPR
125 -20 ~ +85
°C °C
Storage Temperature
TSTG
-40 ~ +150
°C
Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
ELECTRICAL CHARACTERISTICS (TA=25°C, unless otherwise specified)
PARAMETER
SYMBOL
TEST CONDITIONS
Collector-Base Breakdown Voltage
VCBO IC=100μA
Collector-Emitter Breakdown Voltage
VCEO IC=10mA
Collector-Emitter Breakdown Voltage
VCES IC=100μA
Collector-Emitter Breakdown Voltage
VCEV IC=100μA, VEB=1V
Emitter-Base Breakdown Voltage
VEBO IE=100μA
Collector Cut-Off Current
ICBO VCB=50V
Emitter Cut-Off Current
IEBO VEB=4V
Collector Emitter Cut-Off Current
ICES
VCES=50V
IC=0.5A, IB=10mA
Collector-Emitter Saturation Voltage (Note)
VCE(SAT)
IC=1A, IB=10mA IC=2A, IB=10mA
IC=4A, IB=50mA
Base-Emitter Saturation Voltage (Note) VBE(SAT) IC=4A, IB=50mA
Base-Emitter Turn-On Voltage (Note)
VBE(ON) IC=4A, VCE=2V
IC=10mA, VCE=2V
DC Current Gain (Note)
IC=0.5A, VCE=2V hFE IC=1A, VCE=2V
IC=4A, VCE=2V
IC=20A, VCE=2V
Transition Frequency
fT IC=50mA, VCE=10V, f=50MHz
Output Capacitance
COBO VCB=10V, f=1MHz
Turn-On Time
tON IC=4A, IB=40mA, VCC=10V
Turn-Off Time
tOFF IC=4A, IB=±40mA, VCC=10V
Note: Measured under pulsed conditions. Pulse width=300μs. Duty cycle ≤2%
MIN TYP MAX UNIT
80 120
V
25 35
V
80 120
V
80 120
V
5 8.75
V
0.3 10 nA
0.3 10 nA
0.3 10 nA
30 70
60 125
130 280
mV
155 400
890 980 mV
820 920 mV
250 430
300 450
300 450 1200
200 350
7
180 MHz
45 60 pF
125 ns
380 ns
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 4
QW-R201-061.F
X1049A
TYPICAL CHARACTERISTICS
NPN SILICON TRANSISTOR
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
3 of 4
QW-R201-061.F
X1049A
TYPICAL CHARACTERISTICS (Cont.)
NPN SILICON TRANSISTOR
UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. UTC reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
4 of 4
QW-R201-061.F
.