TRIACS
UTC BT136E
TRIACS
DESCRIPTION
Passivated triacs in a plastic envelope, intended for use in applications requiring high b...
Description
UTC BT136E
TRIACS
DESCRIPTION
Passivated triacs in a plastic envelope, intended for use in applications requiring high bidirectional transient and blocking voltage capability and high thermal cycling performance. Typical applications include motor control, industrial and domestic lighting, heating and static switching.
TRIAC
SYMBOL
MT2
1
TO-220
G MT1
1:MT1 2:MT2 3:GATE
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Repetitive peak off-state voltages RMS on-state current full sine wave; Tmb ≤107 °C Non-repetitive peak on-state current (Full sine wave; Tj = 25 °C prior to surge) t = 20ms t = 16.7 ms I2t for fusing t = 10 ms Repetitive rate of rise of on-state current after triggering ITM = 6 A; IG = 0.2A;dIG /dt = 0.2A/μs T2+G+ T2+GT2-GT2-G+ BT136-600 BT136-800
SYMBOL
VDRM www.DataSheet4U.com IT(RMS)
RATINGS
600* 800 4
UNIT
V A
ITSM
25 27 3.1
A A2s
I2t
dIT /dt
50 50 50 10
A/μs
Peak gate voltage VGM 5 V Peak gate current IGM 2 A Peak gate power PGM 5 W Average gate power (over any 20 ms period) PG(AV) 0.5 W ℃ Storage temperature Tstg -40 ~ 150 ℃ Operating junction temperature Tj 125 *Although not recommended, off-state voltages up to 800V may be applied without damage, but the traic may switch to the on-state. The rate of rise of current should not exceed 3A/µs.
UTC
UNISONIC TECHNOLOGIES CO., LTD.
1
QW-R401-005,A
UTC BT136E
THERMAL RESISTANCES
PARAMETER
Thermal resistance Junction to mounting base Full cycle Half cycle Thermal resistance Junction to ambient (In free air...
Similar Datasheet