DU1P0-xxx

1 WATT UNREGULATED OUTPUT POWER SINGLE-IN-LINE PACKAGE (SIP) HIGH EFFICIENCY FOR LOW POWER APPLICATION UL 94-V0 NON-CONDUCTED CASE INTERNAL INPUT & OUTPUT FILTER INPUT / OUTPUT ISOLATION UP TO 3KVDC The DU1P0 series are the standard building blocks for on-board distributed power systems. They are ideally suited to providing single and dual supplies on primarily digital boards with added benefit of galvanic isolation to reduce switching noise. All of the rated power may be drawn from a single pin provided the total load does not exceed 1 watt. T E C H N I C A L S P E C I F I C AT I O N OUTPUT SPECIFICATIONS Output power Voltage accuracy Minimum load (Note 1) Line regulation Load regulation Ripple and noise Temperature coefficient Short circuit protection LL to HL at Full Load 20% to 100% FL 20MHz bandwidth 5V output others Full load and nominal Vin All specifications are typical at nominal input, full load and 25ºC otherwise noted GENERAL SPECIFICATIONS 1 Watt max ± 5% 10% of FL 1.3% / 1% of Vin Efficiency Isolation voltage Isolation resistance Input to Output Standard Suffix-N See table 1000VDC, min 3000VDC, min 10 ohms, min 30pF, max 60KHz, min UL1950, EN60950 Non-conductive black plastic None Epoxy (UL94-V0) 0.77 X 0.24 X 0.40 Inch (19.6 X 6.0 X 10.2 mm) 2.0g (0.071oz) 1.471 x 107 hrs 9 Isolation capacitance ± 10% www.DataSheet4U.com Switching frequency ± 8% Design meet safety standard Case material Base material Potting material 100mVp-p I0.1% / ºC, max S...