HIGH VOLTAGE INTERFACE
SP1404BW, D3702
ADVANCE INFORMATION
DS3139-2.0
SP1404BW
HIGH VOLTAGE INTERFACE CIRCUIT
The SP1404 is a bipolar integra...
Description
SP1404BW, D3702
ADVANCE INFORMATION
DS3139-2.0
SP1404BW
HIGH VOLTAGE INTERFACE CIRCUIT
The SP1404 is a bipolar integrated circuit comprising five individual digital current amplifier circuits. Each circuit accepts a logic input from TTL, CMOS or a similar source and drives a high-current load at the output. The outputs are capable of withstanding high negative voltages in the ‘off’ state, making the SP1404 particularly suited to telecommunications applications.
+VCC INPUT 1 INPUT 2 INPUT 3 INPUT 4
14
1
NC OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4
CIRCUIT DESCRIPTION (Fig.2)
OUTPUT 5 INPUT 5 The SP1404 operates as a power amplifier interfacing from a voltage-level sensitive input to a high-current output switch. 7 0V ELECTRONIC 0V EXCHANGE 8 The input threshold is TTL-compatible, with a low input current DP14 requirement enabling one standard TTL output to drive many interfaces. The low input current requirement also makes it possible to use series current-limiting resistors to protect the Figure 1: Pin connections (viewed from underside) SP1404 inputs. Each element of the device performs as inverting function, i.e. a low voltage level on the input causes a high current in the BIAS CHAIN output. If the input is left open-circuit, the output will be off and FOR ALL 5 ELEMENTS the output current will be zero. +VCC The isolation of the integrated circuit is biased to the more negative of the two earth points by diodes D1 and D2 so that www.DataSheet4U.com differences of up to (...
Similar Datasheet