Very Low Current Multi-Modulus Divider
Obsolescence Notice
This product is obsolete. This information is available for your convenience only.
www.DataSheet4U....
Description
Obsolescence Notice
This product is obsolete. This information is available for your convenience only.
www.DataSheet4U.com
For more information on Zarlink’s obsolete products and replacement product lists, please visit
http://products.zarlink.com/obsolete_products/
SP8715 SP8715
1100MHz Very Low Current Multi-Modulus Divider
DS3830
ISSUE 4.2
September 1999
Features
G G G G G G G
Operation to 1100MHz Very Low Power Single Supply Operation 2.7V to 5.25V Power Down Facility for Battery Economy Latched Modulus Control Input Push Pull Output Drive ESD Protection on All Pins†
Ordering Information SP8715/IG/MPAS Industrial Temperature Range Miniature Plastic SOIC Package SP8715/IG/MPAC As Above supplied on Tape and Reel
Description
The SP8715 is a switchable divide by 64/65, 128/129 programmable divider which is guaranteed to operate up to 1100MHz. It will operate from a supply of 2.7V to 5.25V and requires typically 3.6mA (including the output current). It also features a power down facility for battery economy. The RF inputs are internally biased and should be capacitively coupled to the signal source. The output is designed to interface with CMOS synthesisers.
Applications
G G G
Cellular Telephones Cordless Telephones Mobile Radio
†
ESD precautions must be observed
V CK 6 MC D 2 Q
CC
D TYPE
BIAS
7
POWER DOWN
3 RS V CC
250K
5 V EE
CONTROL LOGIC
NOMINAL
RF INPUT (CLOCK)
1
DIVIDE BY 4/5
8 V
DIVIDE BY 16 / 32
4 OUTPUT
EE
Figure 1 Block Diagram
1
SP871...
Similar Datasheet