Dual ultra low capacitance protection
USBULC6-2F3
IPAD™ Dual ultra low capacitance protection for high speed USB
Main application
■
Hi-Speed USB port in wire...
Description
USBULC6-2F3
IPAD™ Dual ultra low capacitance protection for high speed USB
Main application
■
Hi-Speed USB port in wireless handsets (up to 480 Mb/s according to USB 2.0 High Speed Specification)
Features
■ ■ ■ ■ ■ ■ ■
Ultra low diode capacitance (1.2 pF max) Two data lines (D+ and D-) protected against 15 kV ESD Breakdown Voltage VBR = 6.0 V min Flip-Chip 400 µm pitch, lead-free Very low leakage current Very small PCB area RoHS compliant
www.DataSheet4U.com
Flip-Chip (4 Bumps)
Pin configuration (bump side)
A B 1 2
Description
The USBULC6-2F3 is a monolithic, application specific discrete device dedicated to ESD protection of high speed interfaces. Its ultra low line capacitance secures a high level of signal integrity without compromizing the protection of downstream sensitive chips against the most stringently characterized ESD strikes.
Configuration
A1 B1
Benefits
■ ■ ■
Minimized impact on rise and fall times for maximum data integrity Low PCB space occupation Higher reliability offered by monolithic integration
A2
B2
Note: B1 and B2 bumps must be grounded on the PCB together
Complies with the following standards:
IEC 61000-4-2: 15 kV (air discharge) 8 kV (contact discharge) MIL STD 883G - Method 3015.7 25 kV (Human body model)
Order code
Part Number USBULC6-2F3 Marking EH
TM: IPAD is a trademark of STMicroelectronics
December 2006
Rev 1
1/8
www.st.com
Characteristics
USBULC6-2F3
1
Characteristics
Table 1.
Symbol VPP PPP Tj Top Tstg
Absolute Maximum...
Similar Datasheet