DatasheetsPDF.com

NTGD4161P Dataheets PDF



Part Number NTGD4161P
Manufacturers ON Semiconductor
Logo ON Semiconductor
Description Power MOSFET
Datasheet NTGD4161P DatasheetNTGD4161P Datasheet (PDF)

NTGD4161P Power MOSFET −30 V, −2.3 A, Dual P−Channel, TSOP−6 Features • • • • • Fast Switching Speed Low Gate Charge Low RDS(on) Independently Connected Devices to Provide Design Flexibility This is a Pb−Free Device http://onsemi.com V(BR)DSS −30 V RDS(on) Max 160 mW @ −10 V 280 mW @ −4.5 V Applications • Load Switch • Battery Protection • Portable Devices Like PDAs, Cellular Phones and Hard Drives MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Parameter Drain−to−Source Voltage Gate−t.

  NTGD4161P   NTGD4161P


Document
NTGD4161P Power MOSFET −30 V, −2.3 A, Dual P−Channel, TSOP−6 Features • • • • • Fast Switching Speed Low Gate Charge Low RDS(on) Independently Connected Devices to Provide Design Flexibility This is a Pb−Free Device http://onsemi.com V(BR)DSS −30 V RDS(on) Max 160 mW @ −10 V 280 mW @ −4.5 V Applications • Load Switch • Battery Protection • Portable Devices Like PDAs, Cellular Phones and Hard Drives MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Parameter Drain−to−Source Voltage Gate−to−Source Voltage Continuous Drain Current (Note 1) Steady State t≤5s Power Dissipation (Note 1) Steady State t≤5s Continuous Drain Current (Note 2) Power Dissipation (Note 2) Pulsed Drain Current Steady State TA = 25°C TA = 85°C TA = 25°C tp = 10 ms PD IDM TJ, TSTG IS TL ID TA = 25°C TA = 85°C TA = 25°C TA = 25°C PD Symbol VDSS VGS ID Value −30 ±20 −2.1 −1.5 www.DataSheet4U.com P−Channel (MOSFET1) D1 P−Channel (MOSFET2) D2 Unit V V A G1 G2 −2.3 1.1 1.3 −1.5 −1.1 0.6 −10 W S1 S2 MARKING DIAGRAM A 1 W A °C A °C TSOP−6 CASE 318G STYLE 13 S8 M G D1 S1 D2 S8 MG G G1 S2 G2 = Specific Device Code = Date Code* = Pb−Free Package Operating Junction and Storage Temperature Source Current (Body Diode) Lead Temperature for Soldering Purposes (1/8” from case for 10 s) −55 to 150 −0.8 260 (Note: Microdot may be in either location) THERMAL RESISTANCE RATINGS Parameter Junction−to−Ambient − Steady State (Note 1) Junction−to−Ambient − Steady State (Note 2) Junction−to−Ambient − t ≤ 5 s (Note 1) Junction−to−Case − Steady State (Note 1) RqJC Symbol RqJA Max 115 225 95 40 Unit °C/W *Date Code orientation may vary depending upon manufacturing location. ORDERING INFORMATION Device NTGD4161PT1G Package TSOP−6 (Pb−Free) Shipping † 3000 / Tape & Reel Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. When surface mounted to an FR4 board using 1 in. pad size (Cu. area = 1.2 in2 [1 oz] including traces) 2. When surface mounted to an FR4 board using minimum recommended pad size (Cu. area = 0.047 in2) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 2006 1 September, 2006 − Rev. 1 Publication Order Number: NTGD4161P/D NTGD4161P ELECTRICAL CHARACTERISTICS (TJ=25°C unless otherwise stated) Parameter OFF CHARACTERISTICS Drain−to−Source Breakdown Voltage Drain−to−Source Breakdown Voltage Temperature Coefficient Zero Gate Voltage Drain Current V(BR)DSS V(BR)DSS/TJ IDSS VGS = 0 V, VDS = −24 V TJ = 25°C TJ = 125°C VGS = 0 V, ID = −250 mA −30 22 −1.0 −10 ±100 nA V mV/°C mA Symbol Test Condition Min Typ Max Unit Gate−to−Source Leakage Current ON CHARACTERISTICS (Note 3) Gate Threshold Voltage Gate Threshold Temperature Coefficient Drain−to−Source On Resistance IGSS VDS = 0 V, VGS = ±20 V VGS(TH) VGS(TH)/TJ RDS(on) VGS = VDS, ID = −250 mA −1.0 −1.9 −4.7 −3.0 V mV/°C VGS = −10 V, ID = −2.1 A VGS = −4.5 V, ID = −1.6 A 105 190 2.7 160 280 mΩ Forward Transconductance CHARGES AND CAPACITANCES Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge Threshold Gate Charge Gate−to−Source Charge Gate−to−Drain Charge SWITCHING CHARACTERISTICS (Note 4) Turn−On Delay Time Rise Time Turn−Off Delay Time Fall Time gFS VDS = −5.0 V, ID = −2.1 A S CISS COSS CRSS QG(TOT) QG(TH) QGS QGD VGS = −10 V, VDS = −5.0 V, ID = −2.1A VDS = −15 V, f = 1.0 MHz, VGS = 0 V 281 50 28 5.6 0.65 1.2 0.90 7.1 pF nC td(on) tr td(off) tf VGS = −4.5 V, VDD = −15 V, ID = −1.0 A, RG = 6.0 Ω 7.6 9.2 12.5 4.5 14 23 20 12 ns DRAIN−SOURCE DIODE CHARACTERISTICS Forward Diode Voltage VSD VGS = 0 V, IS = −0.8 A TJ = 25°C TJ = 125°C −0.79 −0.65 8.0 VGS = 0 V, dIS/dt = 100 A/ms, IS = −0.8 A 5.7 2.3 3 nC ns −1.2 V Reverse Recovery Time Charge Time Discharge Time Reverse Recovery Charge tRR ta tb QRR 3. Pulse Test: pulse width ≤ 300 ms, duty cycle ≤ 2%. 4. Switching characteristics are independent of operating junction temperatures. http://onsemi.com 2 NTGD4161P TYPICAL PERFORMANCE CURVES 5 −ID, DRAIN CURRENT (A) 5 −10 V −4.5 V TJ = 25°C −ID, DRAIN CURRENT (A) VDS ≥ −3 V 4 −4 V 4 3 −3.8 V −3.6 V −3.4 V 3 2 2 150°C −40°C 1 2 3 4 −VGS, GATE−TO−SOURCE VOLTAGE (V) 5 1 −3.2 V −3 V −2.8 V 0 1 2 3 4 −VDS, DRAIN−TO−SOURCE VOLTAGE (V) 5 1 25°C 0 0 Figure 1. On−Region Characteristics RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) Figure 2. Transfer Characteristics 0.5 ID = −2.1 A 0.4 0.4 0.35 0.3 VGS = −4.5 V 0.25 0.2 0.15 0.1 VGS = −10 V 0.05 0 0 1 2 3 4 5 6 −ID, DRAIN CURRENT (A) TJ = 25°C 0.3 TJ = 125°C 0.2 TJ = 25°C 0.1 0 3 4 5 6 7 8 9 10 −VGS, GATE−TO−SOURCE VOLTAGE (V) Fig.


NTF6P02T3 NTGD4161P NTGS3441P


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)