single-chip 8-port framer and line interface unit (LIU) combination
DS26518 8-Port T1/E1/J1 Transceiver
www.maxim-ic.com
GENERAL DESCRIPTION
The DS26518 is a single-chip 8-port framer and...
Description
DS26518 8-Port T1/E1/J1 Transceiver
www.maxim-ic.com
GENERAL DESCRIPTION
The DS26518 is a single-chip 8-port framer and line interface unit (LIU) combination for T1, E1, and J1 applications. Each port is independently configurable, supporting both long-haul and short-haul lines. The 8-port SCT is software compatible with the DS26519 and nearly software compatible with the DS26528 and its derivatives.
FEATURES
Eight Complete T1, E1, or J1 Long-Haul/ Short-Haul Transceivers (LIU Plus Framer) Independent T1, E1, or J1 Selections for Each Transceiver Fully Internal Impedance Match, No External Resistor Software-Selectable Transmit- and ReceiveSide Termination for 100Ω T1 Twisted Pair, 110Ω J1 Twisted Pair, 120Ω E1 Twisted Pair, and 75Ω E1 Coaxial Applications Hitless Protection Switching Crystal-Less Jitter Attenuators Can Be Selected for Transmit or Receive Path; Jitter Attenuator Meets ETS CTR 12/13, ITU-T G.736, G.742, G.823, and AT&T Pub 62411
www.DataSheet4U.com
APPLICATIONS
Routers Channel Service Units (CSUs) Data Service Units (DSUs) Muxes Switches Channel Banks T1/E1 Test Equipment
FUNCTIONAL DIAGRAM
DS26518
T1/E1/J1 NETWORK
External Master Clock Can Be Multiple of 2.048MHz or 1.544MHz for T1/J1 or E1 Operation; This Clock is Internally Adapted for T1 or E1 Usage in the Host Mode Receive-Signal Level Indication from -2.5dB to -36dB in T1 Mode and -2.5dB to -44dB in E1 Mode in Approximate 2.5dB Increments Transmit Open- and Short-Circuit Detection LIU LOS in Accordan...
Similar Datasheet