ATS643LSH
Self-Calibrating, Zero-Speed Differential Gear Tooth Sensor with Continuous Update
Features and Benefits
▪ ▪ ...
ATS643LSH
Self-Calibrating, Zero-Speed Differential Gear Tooth Sensor with Continuous Update
Features and Benefits
▪ ▪ ▪ ▪ ▪ ▪ ▪ Fully-optimized differential digital gear tooth sensor Single chip-IC for high reliability Internal current
regulator for 2-wire operation Small mechanical size (8 mm diameter x 5.5 mm depth) Switchpoints air gap independent Digital output representing gear profile Precise duty cycle accuracy throughout temperature range ▪ Large operating air gaps ▪ <2 ms power-on time
Description
The ATS643 is an optimized combination of integrated circuit and magnet that provides a manufacturer-friendly solution for true zero-speed digital gear-tooth sensing in two-wire applications. The device consists of a single-shot molded plastic package that includes a samarium cobalt magnet, a pole piece, and a Hall-effect IC that has been optimized to the magnetic circuit and the automotive environment. This small package can be easily assembled and used in conjunction with a wide variety of gear shapes and sizes. The integrated circuit incorporates a dual element Hall-effect sensor with signal processing circuitry that switches in response to differential magnetic signals created by rotating ferrous targets. The device contains a sophisticated compensating circuit to eliminate magnet and system offsets immediately at power-on. Digital tracking of the analog signal is used to achieve true zero-speed operation, while also setting the device switchpoints. The resulting swi...