2-megabit 2.7-volt Only Serial DataFlash
Features
• • • • • • • • • • • • • •
100% Compatible to AT45D021 Single 2.7V - 3.6V Supply Serial Interface Architecture...
Description
Features
100% Compatible to AT45D021 Single 2.7V - 3.6V Supply Serial Interface Architecture Page Program Operation – Single Cycle Reprogram (Erase and Program) – 1024 Pages (264 Bytes/Page) Main Memory Optional Page and Block Erase Operations Two 264-byte SRAM Data Buffers – Allows Receiving of Data while Reprogramming of Nonvolatile Memory Continuous Read Capability through Entire Array Internal Program and Control Timer Low Power Dissipation – 4 mA Active Read Current Typical – 2 µA CMOS Standby Current Typical 13 MHz Max Clock Frequency Hardware Data Protection Feature Serial Peripheral Interface (SPI) Compatible – Modes 0 and 3 CMOS and TTL Compatible Inputs and Outputs Commercial and Industrial Temperature Ranges
2-megabit 2.7-volt Only Serial DataFlash® AT45DB021A
Recommend using AT45DB021B for new designs.
Description
The AT45DB021A is a 2.7-volt only, serial interface Flash memory suitable for in-system reprogramming. Its 2,162,688 bits of memory are organized as 1024 pages of 264 bytes each. In addition to the main memory, the AT45DB021A also contains two SRAM data buffers of 264 bytes each. The buffers allow receiving of data while a page in the main memory is being reprogrammed. Unlike conventional Flash www.DataSheet4U.com (continued)
Pin Configurations
Pin Name CS SCK SI SO WP RESET RDY/BUSY Function Chip Select Serial Clock Serial Input Serial Output Hardware Page Write Protect Pin Chip Reset Ready/Busy PLCC
CS NC NC GND VCC NC NC...
Similar Datasheet